Vacuum-UMV G2 series
Vacuum-UMV G2 series
- Winding Type: S for UMV3 G2 and UMV6 G2, N for UMV12 G2.
- Motor Type: 3-phase synchronous with a maximum voltage of 230 Vac rms (325 Vdc).
- Peak Force: Ranges from 100 N for UMV3 G2 to 401 N for UMV12 G2 at 25°C.
- Continuous Force: Passive cooling provides 5.9 N to 20 N, while active cooling provides 22 N to 87 N.
- Maximum Speed: 18.5 m/s for UMV3 G2 and UMV6 G2, 7.0 m/s for UMV12 G2.
- Peak Current: 5.0 Arms for UMV3 G2 to 20.1 Arms for UMV12 G2 at 25°C.
- Continuous Current: Passive cooling ranges from 0.30 Arms to 1.02 Arms, active cooling from 1.09 Arms to 4.36 Arms.
- Back EMF: 16 Vdc/m/s for UMV3 G2 and UMV6 G2, 39 Vdc/m/s for UMV12 G2.
- Resistance and Induction: Resistance per phase ranges from 1.4 Ω to 8.5 Ω, induction from 0.5 mH to 2.8 mH.
- Continuous Power Loss: 25 W to 100 W.
- Maximum Coil Temperature: 80°C.
- Thermal Resistance: 2.4 K/W to 0.60 K/W.
- Temperature Sensors: 3xPTC + 1xNTC.
- Coil Unit Mass: 0.19 kg to 0.61 kg.
- Coil Unit Length: 81 mm to 261 mm.
- Magnet Pitch: 30 mm.
- Lead Wire Mass: 41 g.
- Specifications are subject to ±10% variation.
- Mounting instructions and CAD files are available online.
- Magnet yokes can be butted together, with dimensions of 150 mm and 390 mm.
Catalog excerpts
UMV Magnet yoke dimensions UMV - G2 ironless vacuum seriesParameter Remarks Symbol Unit UMV3 G2 UMV6 G2 UMV12 G2 Winding type S S NS Lead wire type (sensor, 4x) length 1 m d mm (awg) 0.8 (26) 1 Depends on environmental conditions in the application. Continuous force noted has been determined with a typical thermal resistance value for passive cooling, and a vacuum chamber wall of 40°C. 2 Depends on environmental conditions in the application. Continuous force noted has been determined with a thermal resistance of 0.02 K/W and a mounting surface of 20°C when the motor is driven at continuous current. 3 Actual values depend on bus voltage.
Open the catalog to page 1
Magnet yokes Coil units GNET YOKES Mounting instructions and flatness or parallelism requirements can be found in the Vacuum installation manual. 3D CAD files can be downloaded from our website.
Open the catalog to page 2All Tecnotion catalogs and technical brochures
QMT Torque Motors24 Pages
Unano Ironless leaflet2 Pages
TD Iron core2 Pages
Vacuum brochure English16 Pages
Unano Specsheet2 Pages
Ironless linear motor brochure28 Pages
Unano ironless applications2 Pages
Motor portfolio2 Pages
TxX ironcore leaflet2 Pages
Frameless torque motor brochures36 Pages
Iron core linear motor brochure36 Pages
Vacuum-UXXV G2 series16 Pages
Vacuum-ULV G2 series2 Pages
QTL 485 Torque motors2 Pages
QTL 385 Torque motors2 Pages
QTL 310 Torque motors2 Pages
QTL 290 Torque motors2 Pages
QTL 230 Torque motors2 Pages
QTL 210 Torque motors2 Pages
QTR 160 Torque motors2 Pages
QTR 133 Torque motors2 Pages
QTR 105 Torque motors2 Pages
QTR 78 Torque motors2 Pages
QTR 65 torque series2 Pages
UXX SERIES2 Pages
UXA SERIES2 Pages
UF SERIES2 Pages
UL SERIES2 Pages
UM SERIES2 Pages
UC SERIES2 Pages
TBW serie2 Pages
TB series2 Pages
TL Series2 Pages
TM series2 Pages
TL482 Pages
Simulation tool2 Pages
transport conveyer2 Pages
- Electromotor
- Synchronous motor
- Alternating current motor
- Multipole motor
- Three-phase motor
- Position transducer
- Permanent magnet motor
- Cable assembly
- Linear position transmitter
- Custom motor
- Robotic motor
- Analog position transducer
- No-contact position sensor
- Industrial position sensor
- Machine tool motor
- Tecnotion linear motor
- Packaging machine motor
- High-precision motor
- Tecnotion torque motor
- Motor for medical applications