Vacuum-ULV G2 series
Vacuum-ULV G2 series
- Winding Type: N, S
- Motor Type: 3-phase synchronous, Max Voltage: 230 Vac rms (325 Vdc)
- Peak Force at 25°C: 720 N (ULV9 G2), 719 N (ULV9 G2)
- Continuous Force (Passive Cooled) at Tmax: 41 N
- Continuous Force (Active Cooled) at Tmax: 164 N (ULV9 G2), 165 N (ULV9 G2)
- Maximum Speed at 325 V: 5.0 m/s (ULV9 G2), 13.6 m/s (ULV9 G2)
- Motor Force Constant at 20°C: 68.0 N/Arms (ULV9 G2), 27.3 N/Arms (ULV9 G2)
- Motor Constant at 25°C: 275 N²/W (ULV9 G2), 278 N²/W (ULV9 G2)
- Peak Current at 25°C: 10.6 Arms (ULV9 G2), 26.3 Arms (ULV9 G2)
- Continuous Current (Passive Cooled) at Tmax: 0.61 Arms (ULV9 G2), 1.52 Arms (ULV9 G2)
- Continuous Current (Active Cooled) at Tmax: 2.42 Arms (ULV9 G2), 6.05 Arms (ULV9 G2)
- Back EMF ph-phpeak: 56 Vdc/m/s (ULV9 G2), 22 Vdc/m/s (ULV9 G2)
- Resistance per Phase at 25°C: 5.6 Ω (ULV9 G2), 0.9 Ω (ULV9 G2)
- Induction per Phase: 4.4 mH (ULV9 G2), 0.7 mH (ULV9 G2)
- Electrical Time Constant: 0.8 ms
- Continuous Power Loss at Tmax: 120 W
- Maximum Coil Temperature: 80°C
- Thermal Resistance Coils to Mounting Surface: 0.50 K/W
- Thermal Time Constant: 88 s
- Temperature Sensor: 3xPTC + 1xNTC
- Coil Unit Mass: 1.10 kg
- Coil Unit Length: 273 mm
- Motor Attraction Force: 0 N
- Magnet Pitch: 42 mm
- Lead Wire Mass: 41 g
- Lead Wire Type (Power): 1.5 mm (awg 20)
- Lead Wire Type (Sensor): 0.8 mm (awg 26)
- ULV - G2 Ironless Vacuum Series
- Magnet Yoke Dimensions: 126 mm, 420 mm
- M5 Bolts: 3, 10
- Mass: 12.3 kg/m
- Magnet Yokes can be butted together
- Approvals: Vacuum EN - 117274 - Ver. 1.4
- Mounting instructions and flatness or parallelism requirements can be found in the Vacuum installation manual. 3D CAD files are available for download.
Catalog excerpts
ULV - G2 ironless vacuum series ULV Magnet yoke dimensions Magnet yokes can be butted together. Motor type, max voltage ph-ph Lead wire type (sensor, 4x) length 1 m d mm (awg) 0.8 (26) 1 Depends on environmental conditions in the application. Continuous force noted has been determined with a typical thermal resistance value for passive cooling, and a vacuum chamber wall of 40°C. 2 Depends on environmental conditions in the application. Continuous force noted has been determined with a thermal resistance of 0.02 K/W and a mounting surface of 20°C when the motor is driven at continuous current. 3 Actual values depend on bus voltage.
Open the catalog to page 1
Magnet yokes Coil unit 273 COIL UNIT ULV9 G2 Mounting instructions and flatness or parallelism requirements can be found in the Vacuum installation manual. 3D CAD files can be downloaded from our website.
Open the catalog to page 2All Tecnotion catalogs and technical brochures
QMT Torque Motors24 Pages
Unano Ironless leaflet2 Pages
TD Iron core2 Pages
Vacuum brochure English16 Pages
Unano Specsheet2 Pages
Ironless linear motor brochure28 Pages
Unano ironless applications2 Pages
Motor portfolio2 Pages
TxX ironcore leaflet2 Pages
Frameless torque motor brochures36 Pages
Iron core linear motor brochure36 Pages
Vacuum-UXXV G2 series16 Pages
Vacuum-UMV G2 series2 Pages
QTL 485 Torque motors2 Pages
QTL 385 Torque motors2 Pages
QTL 310 Torque motors2 Pages
QTL 290 Torque motors2 Pages
QTL 230 Torque motors2 Pages
QTL 210 Torque motors2 Pages
QTR 160 Torque motors2 Pages
QTR 133 Torque motors2 Pages
QTR 105 Torque motors2 Pages
QTR 78 Torque motors2 Pages
QTR 65 torque series2 Pages
UXX SERIES2 Pages
UXA SERIES2 Pages
UF SERIES2 Pages
UL SERIES2 Pages
UM SERIES2 Pages
UC SERIES2 Pages
TBW serie2 Pages
TB series2 Pages
TL Series2 Pages
TM series2 Pages
TL482 Pages
Simulation tool2 Pages
transport conveyer2 Pages
- Electromotor
- Synchronous motor
- Alternating current motor
- Multipole motor
- Three-phase motor
- Position transducer
- Permanent magnet motor
- Cable assembly
- Linear position transmitter
- Custom motor
- Robotic motor
- Analog position transducer
- No-contact position sensor
- Industrial position sensor
- Machine tool motor
- Tecnotion linear motor
- Packaging machine motor
- High-precision motor
- Tecnotion torque motor
- Motor for medical applications