Catalogs >
Tecnotion >
UXA SERIES

UXA SERIES
1 / 2Pages

Catalog excerpts

UXA Series ironless Parameter Winding type Motortype, max voltage ph-ph 3-phase synchronous ironless, 230Vac rms (325Vdc) magnet @ 25°C Continuous force* Maximum speed** Motor force constant UXA6 in 456mm magnet yoke shown Peak force @ 20°C/s increase Bending Radius Dynamic Back EMF phase-phase peak Resistance per phase* Thermal resistance Thermal time constant Temperature cut-off / sensor* **** Depending on Bending Radius, Velocity and Acceleration. Coil unit weight Magnet yokes can be butted together. Coil unit length Magnet yoke dimensions Maximum continuous power loss 5,000,000 cycles 4x cable diameter Electrical time constant* Bending Radius Static UXA3S Power Cable (FLEX cable of 3m) Cable Life**** Maximum continuous current Cable Type Peak current Motor constant Motor attraction force Cable mass Cable type (power) Cable type (sensor) Approvals All specifications ±10% * These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool. ** Actual values depend on bus voltage. Please check the F/v diagram in our simulation tool. *** The UXA3S is only available with a FLEX power cable. The specifications for this cable can be found in the table on the left si

Open the catalog to page 1

Magnet yokes Coil units Mounting instructions and flatness or parallelism requirements can be found in the ironless installation manual. CAD files and 3D models can be downloaded from our website. ©2022 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.

Open the catalog to page 2

UXA SERIES 1 / 2Pages

Catalog excerpts

All Tecnotion catalogs and technical brochures

UXA SERIES
1 / 2Pages