UXA series ironless Parameter Winding type UXA6 in 456mm magnet yoke shown Motor type, max voltage ph-ph Peak force @ 20 K/s increase Bending radius static Magnet yoke dimensions 171 Magnet yokes can be butted together. Continuous force Motor force constant Continuous force Continuous current Back EMF ph-ph peak Continuous power loss Thermal resistance Thermal time constant Coil unit mass Coil unit length Motor attraction force Magnet pitch NN Cable mass Cable type (power) Cable type (sensor) 118805 - Ver. 1.3 Temperature sensor epending on bending radius, velocity and D acceleration. Electrical time constant Bending radius dynamic 5 Continuous current Peak current Cable type Motor constant UXA3S power cable (FLEX cable of 3m) These values are only applicable when the mounting surface is at 20°C and the motor is driven at continuous current. If these values differ in your application, please check our simulation tool. Actual values depend on bus voltage. Please check the F/v diagram in our simulation tool. The maximum coil temperature for CSA certification is 105°C. The maximum coil temperature without CSA certification is 110°C. The UXA3S is only available with

Magnet yokes Coil units Mounting instructions and flatness or parallelism requirements can be found in the ironless installation manual. CAD files and 3D models can be downloaded from our website.