Catalogs >
Tecnotion >
UM SERIES

UM SERIES
1 / 2Pages

Catalog excerpts

UM Series ironless Parameter Winding type Motortype, max voltage ph-ph 3-phase synchronous ironless, 230Vac rms (325Vdc) magnet @ 25°C Continuous force* Maximum speed** Motor force constant UM3 in 150mm magnet yoke shown Peak force @ 20°C/s increase Peak current Maximum continuous current Motor constant Back EMF phase-phase peak Resistance per phase* Maximum continuous power loss Electrical time constant* Thermal resistance Thermal time constant* Temperature cut-off / sensor Coil unit weight 90 Magnet yokes can be butted together. Coil unit length Magnet yoke dimensions Motor attraction force Cable mass Cable type (power) 4022 363 2034 - Ver. 2.2 Cable type (sensor) * These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool. ** Actual values depend on bus voltage. Please check the F/v diagram in our

Open the catalog to page 1

Magnet yokes Coil units COIL UNITS O 3.5 Coil unit O 5.3 Power cable O 3.2 Thermal sensor cable MAGNET YOKES Magnet yoke Hole O3 (2x) For Dowelpin DIN7 O3h8 (Optional use) Optional: Digital Hall Module 14.5 Mounting instructions and flatness or parallelism requirements can be found in the ironless installation manual. CAD files and 3D models can be downloaded from our website. ©2022 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.

Open the catalog to page 2

UM SERIES 1 / 2Pages

Catalog excerpts

All Tecnotion catalogs and technical brochures

UM SERIES
1 / 2Pages