UC series ironless Parameter Motor type, max voltage ph-ph Peak force @ 20 K/s increase Continuous force Maximum speed Motor force constant UC3 in 99mm magnet yoke shown Motor constant Peak current 1 Continuous current Induction per phase Electrical time constant Continuous power loss Thermal resistance Thermal time constant Temperature sensor Magnet yoke dimensions 66 Coil unit mass Coil unit length Motor attraction force Cable mass Cable type (power) Cable type (sensor) Magnet yokes can be butted together. Back EMF ph-phpeak Resistance per phase Cable life (power FLEX)3 Bending radius static (power FLEX) Bending radius dynamic (power FLEX) These values are only applicable when the mounting surface is at 20°C and the motor is driven at continuous current. If these values differ in your application, please check our simulation tool. Actual values depend on bus voltage. Please check the F/v diagram in our simulation tool. Depending on bending radius, velocity and

Coil units COIL UNITS Magnet yokes MAGNET YOKES Hole O3 (2x) For Dowelpin DIN7 O3h8 (Optional use) Mounting instructions and flatness or parallelism requirements can be found in the ironless installation manual. CAD files and 3D models can be downloaded from our website.