TL series Parameter Remarks Sym Unit TL6 TL9 TL12 TL15 TL18 TL24 TL48 Water cooling All TL motors feature integrated cooling channels that allow for the easy setup of a liquid cooled system, at no additional cost. Magnet plate dimensions Le (mm) 192 288 Magnet plates can be butted together. Winding type NSNSNSNSNSNS Q Cable type (sensor) length 1 m d mm (AWG) 4.7 (26) 1 bCNOTION direct drive in motion These values are only applicable when the mounting surface is at 20°C and the motor is driven at continuous current. If these values differ in your application, please check our simulation tool. All specifications ±10% Actual values depend on bus voltage. Please check the F/v diagram in our simulation tool.

COILUNITS COILUNITS COILUNITS Optional: Digital Hall Module Optional: Digital Hall Module Power cable O 4.7 Thermal sensor cable Slotted Hole O5x0.5 (3 deep) For Dowelpin DIN7 O5h8 (Optional use) R 4.6 O5 (3 deep) Hole For Dowelpin DIN7 O5h8 14.7 For Dowelpin (Optional use)DIN7 O5h8 Hole O5 (312deep) 14.7 (Optional use) For Dowelpin 12 DIN7 O5h8 (Optional use) MAGNET PLATES Hole O5 (3 deep) Mounting Height Mounting Height 40 40 ±0.1±0.1 Power cable Power cable O 4.7 Thermal sensor cable Power cable O 4.7 Thermal sensor cable O 4.7 Thermal sensor cable Magnet plates MAGNET PLATES Slotted Hole...