TBW serie
TBW serie
All specifications are subject to a tolerance of ±10%. The TBW motors are approved for water cooling, featuring integrated cooling channels for easy setup without additional cost.
Magnet plates can be butted together. Dimensions for Le (mm) are 192 and 288, with M5 bolts required in quantities of 8 and 12, respectively. The mass is 10.5 kg/m.
The document provides detailed performance parameters for TBW18, TBW30, and TBW45 models, including:
- Winding types: N and S
- Motor type: 3-phase synchronous with a maximum voltage of 400 Vac, rms (565 Vdc)
- Ultimate force at 25°C: 2700 N for TBW18, 4500 N for TBW30, and 6750 N for TBW45
- Peak force at 25°C: 2400 N for TBW18, 4000 N for TBW30, and 6000 N for TBW45
- Continuous force (water-cooled) at 100°C: 1200 N for TBW18, 2000 N for TBW30, and 3000 N for TBW45
- Maximum speed at Umax and Fc: 2.4 m/s for TBW18, 5.0 m/s for TBW30 and TBW45
Key electrical parameters include:
- Ultimate current at 25°C: 20 Arms for TBW18, 41 Arms for TBW30, and 98 Arms for TBW45
- Peak current at 25°C: 15.0 Arms for TBW18, 31.1 Arms for TBW30, and 75 Arms for TBW45
- Continuous current (water-cooled) at 100°C: 6.5 Arms for TBW18, 13.4 Arms for TBW30, and 32.3 Arms for TBW45
- Back EMF ph-ph peak: 152 Vdc/m/s for TBW18, 76 Vdc/m/s for TBW30 and TBW45
Thermal parameters include:
- Continuous power loss at 100°C: 726 W for TBW18, 1209 W for TBW30, and 1804 W for TBW45
- Thermal resistance from coils to mounting surface: 0.10 K/W for TBW18, 0.06 K/W for TBW30, and 0.04 K/W for TBW45
- Water cooling flow for ΔT=3K: 3.1 l/min for TBW18, 5.2 l/min for TBW30, and 7.8 l/min for TBW45
Mechanical parameters include:
- Coil unit mass excluding cables: 7.3 kg for TBW18, 12.3 kg for TBW30, and 18.2 kg for TBW45
- Coil unit length excluding cables: 344 mm for TBW18, 580 mm for TBW30, and 852 mm for TBW45
- Motor attraction force rms at 0 A: 4900 N for TBW18, 8300 N for TBW30, and 12450 N for TBW45
Mounting instructions, including flatness or parallelism requirements, can be found in the iron core installation manual. CAD files and the manual are available for download from the website.
Catalog excerpts
TBW series Water cooling All TBW motors feature integrated cooling channels that allow for the easy setup of a liquid cooled system, at no additional cost. Magnet plate dimensions Magnet plates can be butted together. 1 These values are only applicable when the mounting surface is at 20°C and the motor is driven at continuous current. If these values differ in your application, please check our simulation tool. 2 Actual values depend on bus voltage. Please check the F/v diagram in our simulation tool.
Open the catalog to page 1
Power cable 33 4.7 Thermal cable sensor cable 17O Power Hole O5 (3 deep) For Dowelpin DIN7 O5h8 (Optional use) O 4.7 Thermal sensor cable Power cable O 4.7 Thermal sensor cable Optional: Digital Hall Module Coil units COIL UNITS COIL UNITS COIL UNITS 6.5 14.2 Hole O5 (3 deep) For Dowelpin DIN7 O5h8 Hole O5use) (3 deep) 14.2 (Optional For Dowelpin DIN7 O5h8 (Optional use) 168 14.2 Hole O5 (3 deep) For Dowelpin DIN7 O5h8 12 (Optional use) Slotted Hole OR5x0.5 (3 deep) For Dowelpin DIN74.6O5h8 (Optional use) R 4. 6 Slotted Hole O5x0.5 (3 deep) 168 For Dowelpin DIN7 O5h8 Slotted Hole (Optional use)...
Open the catalog to page 2All Tecnotion catalogs and technical brochures
QMT Torque Motors24 Pages
Unano Ironless leaflet2 Pages
TD Iron core2 Pages
Vacuum brochure English16 Pages
Unano Specsheet2 Pages
Ironless linear motor brochure28 Pages
Unano ironless applications2 Pages
Motor portfolio2 Pages
TxX ironcore leaflet2 Pages
Frameless torque motor brochures36 Pages
Iron core linear motor brochure36 Pages
Vacuum-UXXV G2 series16 Pages
Vacuum-ULV G2 series2 Pages
Vacuum-UMV G2 series2 Pages
QTL 485 Torque motors2 Pages
QTL 385 Torque motors2 Pages
QTL 310 Torque motors2 Pages
QTL 290 Torque motors2 Pages
QTL 230 Torque motors2 Pages
QTL 210 Torque motors2 Pages
QTR 160 Torque motors2 Pages
QTR 133 Torque motors2 Pages
QTR 105 Torque motors2 Pages
QTR 78 Torque motors2 Pages
QTR 65 torque series2 Pages
UXX SERIES2 Pages
UXA SERIES2 Pages
UF SERIES2 Pages
UL SERIES2 Pages
UM SERIES2 Pages
UC SERIES2 Pages
TB series2 Pages
TL Series2 Pages
TM series2 Pages
TL482 Pages
Simulation tool2 Pages
transport conveyer2 Pages
- Electromotor
- Synchronous motor
- Alternating current motor
- Multipole motor
- Three-phase motor
- Position transducer
- Permanent magnet motor
- Cable assembly
- Linear position transmitter
- Custom motor
- Robotic motor
- Analog position transducer
- No-contact position sensor
- Industrial position sensor
- Machine tool motor
- Tecnotion linear motor
- Packaging machine motor
- High-precision motor
- Tecnotion torque motor
- Motor for medical applications