Specifications Overview:
The document provides detailed specifications for the TB series motors, including TB12, TB15, TB18, TB24, and TB30 models. Key parameters include winding type, motor type, ultimate force, peak force, continuous force, maximum speed, motor force constant, and motor constant.

Performance Specifications:
- Winding Type: Varies between N and S across models.
- Motor Type: 3-phase synchronous with a maximum voltage of 400 Vac, rms (565 Vdc).
- Ultimate Force: Ranges from 1800 N for TB12 to 4500 N for TB30.
- Peak Force: Ranges from 1600 N for TB12 to 4000 N for TB30.
- Continuous Force: Ranges from 760 N for TB12 to 1900 N for TB30.
- Maximum Speed: Varies significantly, with TB15 and TB24 reaching up to 5.0 m/s.

Electrical Specifications:
- Ultimate Current: Ranges from 13.0 Arms for TB12 to 66 Arms for TB30.
- Peak Current: Ranges from 10.0 Arms for TB12 to 50 Arms for TB30.
- Continuous Current: Ranges from 4.1 Arms for TB12 to 20.5 Arms for TB30.
- Back EMF: Varies, with TB15 and TB24 having a lower value of 76 Vdc/m/s.
- Resistance and Induction: Resistance per phase and induction per phase are specified for each model.

Thermal Specifications:
- Continuous Power Loss: Ranges from 430 W for TB12 to 1060 W for TB30.
- Thermal Resistance: Decreases from 0.15 K/W for TB12 to 0.06 K/W for TB30.
- Thermal Time Constant: Consistent at 90 seconds across models.
- Temperature Sensor: PTC 1kΩ / KTY 83-122 is used.

Mechanical Specifications:
- Coil Unit Mass: Ranges from 4.9 kg for TB12 to 11.6 kg for TB30.
- Coil Unit Length: Ranges from 244 mm for TB12 to 562 mm for TB30.
- Motor Attraction Force: Ranges from 3400 N for TB12 to 8300 N for TB30.
- Magnet Pitch: Consistent at 24 mm across models.
- Cable Specifications: Includes mass, type, and dimensions for power and sensor cables.

Additional Information:
- Mounting instructions and requirements for flatness or parallelism are available in the iron core installation manual.
- CAD files and the manual can be downloaded from the company's website.
- Magnet plates can be butted together, and specific dimensions and configurations are provided for different models.