Catalogs >
Tecnotion >
TB series

TB series
2Pages

Catalog excerpts

TB Series iron core Parameter Winding type Motortype, max voltage ph-ph 3-phase synchronous Iron core, 400Vac rms (565 Vdc) Peak force @ 6°C/s increase Continuous force* Maximum speed** Motor force constant TB12 on 288mm magnet plate shown Ultimate force @ 10°C/s increase Motor constant Ultimate current Peak current Maximum continuous current Back EMF phase-phase peak coils @ 25°C ex. cable Electrical time constant* Maximum continuous power loss Thermal resistance Thermal Time constant* Temperature cut-off / sensor Magnet plate dimensions Coil unit weight Magnet plates can be butted together. Coil unit length Motor attraction force Cable mass Cable type (power) Cable type (sensor) * These values are only applicable when the mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool. ** Actual values depend on bus voltage. Please check the F/v diagram in o

Open the catalog to page 1

COIL UNITS COIL UNITS Mounting Height Mounting Height 45 ±0.1 45 ±0.1 MAGNET PLATES MAGNET PLATES Slotted Hole O5x0.5 (6 deep) For Dowelpin DIN7 O5h8 Mounting instructions and flatness or parallelism requirements can be found in the iron core installation manual. CAD files, 3D models and the manual can be downloaded from our website. Slotted Hole O5x0.5 (6 deep) For Dowelpin DIN7 O5h8 Optional: Digital Hall Module COIL UNITS Optional: Digital Hall Module 80 80 Hole O5 (6 deep) Hole ODowelpin DIN7 O5h8 For 5 (6 deep) For Dowelpin DIN7 O5h8 Magnet plate Optional: Digital Hall Module Optional:...

Open the catalog to page 2

TB series 2Pages

Catalog excerpts

All Tecnotion catalogs and technical brochures

TB series
2Pages