Catalogs >
Tecnotion >
QTR 65 torque series

QTR 65 torque series
1 / 2Pages

Catalog excerpts

Torque QTR 65 series Parameter Winding type Motortype max. voltage ph-ph Ultimate torque @ 20°C/s increase Peak torque @ 6°C/s increase Continuous torque Maximum speed (3) @ max. voltage Motor torque constant Motor constant QTR-A 65 Stator and rotor shown Ultimate current Peak current Back EMF phase-phase peak Coil resistance per phase Coil induction per phase Electrical time constant Continuous power loss Thermal time constant Temperature cut-off / sensor Stator OD is driven at maximum continuous current. please check our simulation tool or manual. lamination stack. 3. MAXIMUM allowable speed for QTR-A 65 series motors is 28.000 rpm. If you plan a high speed 4022 363 0300 - Ver. 2.2 application, please contact Tecnotion. If these values differ in your application, Motor height mounting surface is at 20°C and the motor 1. These values are only applicable when the 2.Rth based on radial mounting of stator Lamination stack height Rotor inertia Stator mass excluding cables Rotor mass Total mass excluding cables Cable mass Cable type (powe

Open the catalog to page 1

Mounting instructions and tolerances can be found in the torque installation manual. Manuals and 3D CAD files can be downloaded from our website. ©2022 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior notice.

Open the catalog to page 2

QTR 65 torque series 1 / 2Pages

Catalog excerpts

All Tecnotion catalogs and technical brochures

QTR 65 torque series
1 / 2Pages