Catalogs >
Tecnotion >
QTL 385 Torque motors

QTL 385 Torque motors
2Pages

Catalog excerpts

Torque QTL 385 series with cooling ring Parameter Motortype max. voltage ph-ph Winding type Continuous torque Stall torque Peak current Ultimate current Motor constant Motor torque constant Ultimate torque @ 20°C/s increase Peak torque @ 6°C/s increase Back EMF phase-phase peak Back EMF phase-phase RMS Coil resistance per phase Coil induction per phase Electrical time constant Continuous power loss Thermal time constant Water cooling flow Temperature cut-off / sensor 1. Actual values depend on bus voltage. Please check the T/n diagram in our Motor height mounting surface is at 20°C and the motor is driven at maximum continuous current. If these values differ in your application, please check our simulation tool or manual. 4022 363 0300 - Ver. 2.2 3. Rth based on given water flow and pressure. manual or online simulation tool. 2. These values are only applicable when the Lamination stack height Rotor inertia Stator mass excluding cables Rotor mass Total mass excluding cables Cable mass Cable type (power) Cable type (sensor)

Open the catalog to page 1

61 61 15 Mounting instructions and tolerances can be found in the° torque installation manual. Manuals and 3D CAD files can be downloaded from our website. 61 ©2022 Tecnotion BV - All rights reserved - The contents of this document are subject to change without prior n

Open the catalog to page 2

QTL 385 Torque motors 2Pages

Catalog excerpts

All Tecnotion catalogs and technical brochures

QTL 385 Torque motors
2Pages