Magnetic system for quick die clamping on metal presses • Easy in use • Quick & safe clamping • Suitable for dies of any size Safety through power A quick die clamping system changes the entire production process allowing for lean production and small batches. StampTEC is in the heart of this change with no hidden time to fix clamps, make adjustments or test between 2 production batch

Composed by 2 magnetic modules, it's easy to install and integrate into the existing machine and controls. Its modularity allows adaptability for any need. No modification to the press is required. StampTEC is made to fit your press. The new reduced thickness of the modules allows to save daylight. StampTEC is suitable for dies of any shape and size, with no modification. Die standardization is not necessary: savings in engineering time and overall cost. If the die is not magnetic or when the contact surface die/magnet is too small, the die can be equipped with a common steel backplate. The die...

User friendly One operator, with no tools, can operate all the die-clamping procedure easily and in total safety, outside the press. push the button for the upper, then the lower open the press... ready! Uniform Clamping This uniform clamping force allows repeatability and constant quality of the stamping process by eliminating any flexing of die shoe. Traditional clamping Clamping with StampTEC Completely customizable Reference pins can be added to speed-up the positioning of the die. The lower magnet can have a through hole for scrap removal. The system is prearranged for “U” slots for the...

The control interface is small and easy to install. StampTEC is available in 2 versions: • StampTEC EASY, for dies with a Max weight of 1800kg, equipped with simplified electronic control unit ST110P • StampTEC ST, for any size of dies, equipped with ST400 control unit. ST110P “Error-proof” system A set of electronic safety systems are provided to supervise all the operations and in case of failure stop the press. Both control units present several safety devices to avoid accidental MAG or DEMAG: - The buttons must be activated simultaneously (SAFE function). - The interlock key to prevent MAG...