DOUBLE BASCULE POSITIVE AND NEGATIVE BEND Zinc, copper, zinc-coated and painted steel, painted aluminium, stainless steel Production of various materials graphic project ROLLING BENDING MACHINE From 0,4 mm up to 2,0 mm (based on the used material) Worked thickness DOUBLE BASCULE 1,2 mm max. for stainless steel Size finished pieces Length machine ROLLING BENDING MACHINE PATENTED MACHINE Opening in height of the blade Max. length for bending and rolling Min. length for bending and rolling Standard bending width Special max. bending width Max. total power motorization Max. power main hydraulic unit Calendering radius Regulation system of roundness and of metal sheet thickness with mechanic indicator of precision. Bending phase Calendering phase Positive and/or negative bend via G. Zaniol, 70 | Pieve di Soligo (TV) Italia tel. +39 0438 981428 | fax +39 0438 837966 [email protected] www.tecnomaautomazionisrl.it Precision and repeatability (measures makeable on every straight section of the piece realized): Length between two bend, length edge-bend (external measures) and length calendering arc 0-100 mm Allowed tolerance Bending angle Allowed tolerance Field of nominal length Allowed tolerance In no case is allowed that the machine makes abrasion, dents, or any other kind of superficial esthetic defects, even in the absence of removable protective film, on the metal sheet under processing (pre-painted or not and any kind).

ROLLING BENDING MACHINE DOUBLE BASCULE Plier with automatic positioning • Automatic elaboration and optimization of calendering/bend sequences based on the drawing of the piece as well as thickness and nature of material • Automatic check of collisions and interferences with the machine, with the possibility to “authorize” bends or calendering not verified • Modality of management of handmade bends, with possibility to select the wanted bending angle and independently initial position of movable blade, matching parts and back clamps • Modality of management of handmade calendering, with possibility...