- Catalogs
- Tecnologie Speciali Applicate
- PNEUMATIC STOP BRAKES 1-2-3-5
PNEUMATIC STOP BRAKES 1-2-3-5
1 / 1 PageView full catalog
PNEUMATIC STOP BRAKES 1-2-3-5
Product catalog summary
Specifications:
The document discusses pneumatic stop brakes used in controlling movements of articulated arms. These brakes can be installed on individual arm joints or on all three rotation joints. It is important to note that pneumatic brakes are not suitable for torque reaction braking.
Brake Models and Specifications:
Key Considerations:
Pneumatic brakes are specifically for controlling movement and should not be used for torque reaction purposes. The document provides detailed specifications for each model, including the available accessory for each arm rotation axis, brake disc diameter, and braking torque.
The document discusses pneumatic stop brakes used in controlling movements of articulated arms. These brakes can be installed on individual arm joints or on all three rotation joints. It is important to note that pneumatic brakes are not suitable for torque reaction braking.
Brake Models and Specifications:
- FPS100000, FPS110000, FPS120000: Each model is equipped with a vertical column hinge, vertical boom-arm hinge, or horizontal arm, respectively, with a brake disc diameter of 220 mm and a braking torque of 85 Nm.
- FPS200000, FPS210000, FPS220000: Similar to the previous models but designed for two rotation axes, maintaining the same specifications.
- FPS300000, FPS310000, FPS320000: Designed for three rotation axes with a brake disc diameter of 250 mm and a braking torque of 100 Nm.
- FPS500000, FPS510000, FPS520000: Designed for five rotation axes, also with a brake disc diameter of 250 mm and a braking torque of 100 Nm.
Key Considerations:
Pneumatic brakes are specifically for controlling movement and should not be used for torque reaction purposes. The document provides detailed specifications for each model, including the available accessory for each arm rotation axis, brake disc diameter, and braking torque.
See more
Catalog excerpts
TECNOLOGIE SPECIALI APPLICATE PNEUMATIC STOP BRAKES 1-2-3-5 The pneumatic stop brakes are used when you need to control movements by the articulated arm. this type of pneumatic brakes are installed on individual arm joints or on all three rotation joints. Important: Pneumatic brakes cannot be used as brakes for torque reaction. AVAILABLE ACCESSORY FOR EACH ARM ROTATION AXIS BRAKE DISC DIAMETER BRAKING TORQUE Vertical column hinge Vertical boom-arm hinge Vertical column hinge Vertical boom-arm hinge Vertical column hinge Vertical boom-arm hinge Vertical column hinge Vertical boom-arm hinge Brake performance Vertical brake hinge Boom-Arm Vertical brake column hinge FLOOR PNEUMATIC ARTICULATED ARMS
Open the catalog to page 1All Tecnologie Speciali Applicate catalogs and technical brochures
SWINGING DEVICE1 Page
WRIST ACCESSORIES1 Page
TOOL SUPPORT CLAMP1 Page
PNEUMATIC BRAKES1 Page
VERTICAL TELESCOPIC ARMS28 Pages
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.