- Catalogs
- Tecnologie Speciali Applicate
- 24 LOCK MANUAL HORIZONTAL REVOLVING
24 LOCK MANUAL HORIZONTAL REVOLVING
24 LOCK MANUAL HORIZONTAL REVOLVING
This document describes a manual horizontal revolving wrist mechanism with a 24-lock system. It allows for a 360° rotation with a 15° connection level, controlled manually from the back of the wrist. An electric induction safety sensor prevents activation if there is no connection when the tightening axis is parallel to the wrist rotation.
Revolving Tool Body Axis:
This tool is specifically designed for corner tools to provide clearance along the tool body axis, allowing for rotations at required angles. The weight of the tool varies based on its size.
Wrist Models and Specifications:
- PAO310000: Torque Limit 150 Nm, Size 1, 6 Flange Holes, Vertical Rod 30x30, Weight varies.
- PAO410000: Torque Limit 500 Nm, Size 2-3, 6 Flange Holes, Vertical Rod 40x40, Weight varies.
- PAO510000: Torque Limit 1000 Nm, Size 3-5, 6 Flange Holes, Vertical Rod 50x50, Weight varies.
- PAO610000: Torque Limit 2000 Nm, Size 5, 6 Flange Holes, Vertical Rod 60x60, Weight varies.
Wrist Models with Inductive Sensor:
- PLO310000: Torque Limit 150 Nm, Inductive Sensor NO, Size 1, 6 Flange Holes, Vertical Rod 30x30, Weight 5 Kg.
- PLO311000: Torque Limit 150 Nm, Inductive Sensor YES, Size 1, 6 Flange Holes, Vertical Rod 30x30, Weight 5 Kg.
- PLO411000: Torque Limit 500 Nm, Inductive Sensor NO/YES, Size 2-3, 6 Flange Holes, Vertical Rod 40x40, Weight 5 Kg.
- PLO511000: Torque Limit 1000 Nm, Inductive Sensor NO/YES, Size 3-5, 6 Flange Holes, Vertical Rod 50x50, Weight 8.5 Kg.
Catalog excerpts
24 LOCK MANUAL HORIZONTAL REVOLVING This type of wrist, normally locked, allows for releasing the perpendicular axis to the tool body, through the relevant manual command located at the back of the wrist, making possible a 360° rotation with a 15° connection level. Note: When the tightening axis is parallel to the rotation of the wrist, an electric induction safety sensor prevents the tool from being activated if there is no connection. 6 HOLES WRIST MODEL TORQUE LIMIT AVAILABLE ACCESSORY FOR EACH ARM SENSORE INDUTTIVO NUMBER OF FLANGE HOLES REVOLVING TOOL BODY AXIS Questo tipo di polso viene impiegato esclusivamente This type of tool is used exclusively for corner tools to create a clearance along the tool body axis which allows for rotations at the required angle, to be notified when making the purchase. 6 HOLES AVAILABLE ACCESSORY FOR EACH ARM WRIST MODEL TORQUE LIMIT NUMBER OF FLANGE HOLES * The WEIGHT varies depending on the size of the toolutilizzare.
Open the catalog to page 1All Tecnologie Speciali Applicate catalogs and technical brochures
SWINGING DEVICE1 Page
WRIST ACCESSORIES1 Page
TOOL SUPPORT CLAMP1 Page
PNEUMATIC BRAKES1 Page
VERTICAL TELESCOPIC ARMS28 Pages
