Electro Hydraulic Dock Leveller with Rotating Lip
1Pages

Electro Hydraulic Dock Leveller with Rotating Lip - General Description Our electro hydraulic dock levellers are carefully conceived in compliance with EN 1398 European Regulation, which is the most strict and specific regulation for loading/unloading dock levellers. The dock levellers are made with strong self bearing frame (no floor is needed in the housing pit). Surface structure is made with electro welded profiles and covered with anti-skid metal sheet, 90° rotating lip (one section standard - three section lip available), electro hydraulic folded and milled to obtain minimum step when connecting to the loading platform of the truck. MAIN TECHNICAL FEATURES: • electro hydraulic control board with 380V - 50Hz three phase motor. • FE510 6 mm thick steel surface with lower reinforcement profiles. • strong connecting steel lip with reinforcement profiles along the lower part, controlled by a high pressure valve cylinder against crushing between operating lip and loading platform on the truck. • surface and lip (according to EN 1398 regulation) both adapt to the natural progressive subsidence of the truck and the possible lateral lack of balance • dock leveller STOP locking device that intervenes during departure of the truck from the loading ramp, if passing load weighs above 300 Kg, and reduces descending speed at less than 0,05 m/s • coating made of 2 lacquerings of anti rust and application of Blue RAL 5010 synthetic enamel • IP 55 control board with tension push button, n. 1 “Dead Man” push button for surface rising and lip rotation, connecting cables, length 8 meters, anti flame type (CEI 20/22-2 regulations) • strong rubber bumpers applied on dock leveller frame • feet anti snip lateral devices complete with yellow/black zebra stripes • dock leveller locking safety bar for inspection/maintenance • CE marking and installation manual TECNOINDUSTRIALE S.r.l. - Via Mercatelli Maglio, 16 31010 Ponte della Priula di Susegana TV ITALIA - Tel +39.0438.445102 - Fax +39.0438.758971 - e-mail info@tecnoindustriale.it - www.tecnoindustriale.it - P.IVA/C.F./Reg. Imp. di Treviso 01785790260 - REA n. 168683 - Capitale sociale € 119.000 i.