*mydirectindustry

Catalogs
Tecnofluid Engineering SrL
SHORT-STROKE CYLINDERS

SHORT-STROKE CYLINDERS

Product catalog summary

Overview: The CC series short-stroke cylinders by Tecnofluid Engineering are designed for industrial applications requiring compact hydraulic solutions. These cylinders are particularly suitable for small-sized presses due to their reduced dimensions compared to ISO cylinders, allowing them to operate in confined spaces. They are double-acting and equipped with magnetic sensors for precise operation.

Technical Specifications:

Bore sizes range from 20 to 50 mm.
Standard stroke lengths are 20 and 50 mm.
Rated pressure is 160 bar, with a maximum pressure of 250 bar.
Fluid temperature ranges from -20°C to +80°C with standard gaskets, and up to +150°C with Viton gaskets.
Recommended fluids include mineral hydraulic oil and phosphoric esters.

Structural Characteristics: The cylinders feature a magnetic piston with PTFE anti-friction shoes, a chromium-plated steel stem, and a body made from a special light alloy. Key components include nitrile rubber and PTFE gaskets, bronze guide bushings, and a neodymium magnet.

Standard Version Dimensions: The document provides detailed dimensions for pistons ranging from 20 to 100 mm, with corresponding stem sizes and stroke lengths. Various measurements such as A, B, C, and others are specified for precise fitting and operation.

Oil Feed Variants: Options include front feed, back feed, and lower support feed, each with specific dimensions and configurations.

Stem Accessories: Accessories such as male terminals (EM) and hammer heads (ET) are available, with detailed specifications for each type.

Magnetic Sensors: The sensors operate on a voltage range of 1 to 130 V AC/DC, with a maximum current of 500 mA. They have an IP 67 protection rating and come with a 2000 mm cable.

Contact Information: Tecnofluid Engineering SRL is located in Cesano Maderno, Italy, with contact details provided for further inquiries.

Catalog excerpts

SHORT-STROKE CYLINDERS

Open the catalog to page 1

The short-stroke cylinders of the CC series complete the wide range of special cylinders manufactured by our company for a variety of industrial sectors. The CC short-stroke hydraulic cylinders can meet the need for small-sized presses. The main feature of these cylinders is their reduced overall dimensions, compared with ISO cylinders, and therefore can be used to lock or move in very small spaces. They are manufactured in the double-acting version, with magnetic sensors. Their body is provided with holes for sensors. All CC short-stroke cylinders are equipped with a magnetic piston with two...

Open the catalog to page 2

STRUCTURAL CHARACTERISTICS Dust scraper Nitrile rubber + PTFE Guide bushing Stem gasket Nitrile rubber Guiding sliding block Nitrile rubber Chromium-plated steel Piston gasket Nitrile rubber + PTFE Guiding sliding block semipistone posteriore Special light alloy Grano antisvitamento Acciaio brunito

Open the catalog to page 3

STANDARD VERSION

Open the catalog to page 4

OIL FEED VARIANTS (WITHOUT FITTING) FRONT FEED (NO FIXING HOLES FORESEEN ON THE SHAFT AXIS) BACK FEED (NO FIXING HOLES FORESEEN ON THE SHAFT AXIS) LOWER SUPPORT FEED

Open the catalog to page 5

Piston Stroke

Open the catalog to page 6

STEM ACCESSORIES Male terminal EM

Open the catalog to page 7

MAGNETIC SENSORS Circuit type TECHNICAL CHARACTERISTICS Voltage Protection degree TECNOFLUID ENGINEERING SRL • Via Dei Mille,1 • 20031 Cesano Maderno (MB) Italy Tel. +39 0362 645981 • Fax +39 0362 645999 • [email protected] • www.tecnofl

Open the catalog to page 8

SHORT-STROKE CYLINDERS

SHORT-STROKE CYLINDERS

Catalog excerpts

All Tecnofluid Engineering SrL catalogs and technical brochures