HYDRAULIC LOCK CYLINDERS
11Pages

HYDRAULIC LOCK CYLINDERS

The hydraulic lock cylinders of the CB series complete the wide range of special cylinders manufactured by our company for a variety of industrial sectors. The CB hydraulic lock cylinders meet the demand for small-sized pressing devices delivering considerable pushing force. Due to their small overall dimensions (their main characteristic), according to the model, these cylinders can be used to lock small, medium or large-sized pieces. They can also be used for riveting, bending, marking or assembly works. They are manufactured in two versions (simple or double-acting), with a threaded...

Cylinders with threaded body – spring return (Series CB 01) Max working pressure: 200 bar TECHNICAL DATA MODEL Single-acting cylinders Used with oil only 5-15-25 mm strokes Oil volume in Piston area in Oil infeed R cm³ cm² DESCRIPTION Small-sized pushing piston, with threaded body, for easy connection to the equipment. APPLICATIONS Owing to their reduced overall dimensions and considerable pushing force, they are highly recommended to lock small and medium-sized items. They can be provided complete with supports, ring nuts and tips. As a rule they are driven by pressure multipliers or...

Cylinders with threaded body – spring return (Series CB 02) Max working pressure: 320 bar TECHNICAL DATA Single-acting cylinders Used with oil only 15-25-50 mm strokes Oil volume in Piston area Oil infeed R cm³ in cm² DESCRIPTION Small-sized pushing piston, with threaded body, for easy connection to the equipment. APPLICATIONS Owing to their reduced overall dimensions and considerable pushing force, they are highly recommended to clamp medium and large-sized items. They are also used for riveting, bending, marking and assembly works. They can be provided complete with support bases, ring...

Cylinders with smooth through hole – smooth body – spring return (Series CB 03) Max working pressure: 320 bar TECHNICAL DATA Single-acting cylinders Used with oil only 6-12mm stroke. Oil volume in Piston area Oil infeed R cm³ in cm² DESCRIPTION Pushing or pulling lock piston, provided with a smooth through hole, to fit threaded easy-to-adjust pins or tie rods. APPLICATIONS Used for pushing or pulling. In the first case, fit properly shaped heads into the central hole. For rear clamping, use the holes on the lower base of the cylinder. It can be installed on multiple units, and in any...

Cylinders with tapped through hole – threaded body – spring return (Series CB 04) Max working pressure: 320 bar TECHNICAL DATA Single-acting cylinders Used with oil only 6-12mm stroke. Oil volume Piston area in in cm³ cm² DESCRIPTION Pushing or pulling lock piston, provided with a tapped through hole, to fit threaded easy-to-adjust tie rods. Threaded body. APPLICATIONS Used for pushing or pulling. In the first case, fit properly shaped heads into the central hole. For rear clamping, use the holes on the lower base of the cylinder. It can be installed on multiple units, and in any position....

Pull cylinders - threaded body – spring return (Series CB 06) Max working pressure: 320 bar TECHNICAL DATA Single-acting cylinders Used with oil only 10-25 mm stroke Strength at Stroke in Oil volume in Piston area 320 bar in mm. H cm³ in cm² Kgf. DESCRIPTION The piston of these cylinders moves inwards, and generates a pulling force. The body its threaded for easy assembly, and is provided with 4 tapped holes for flange connection. APPLICATIONS These cylinders are used for traditional numeric control or transfer machinery/equipment, and can be assembled in any position, either alone or in...

Double-acting cylinders – threaded body (Series CB 08) Max working pressure: 250 bar TECHNICAL DATA Double-acting cylinders Used with oil only 25-50-80-100 mm strokes Strength at 250 bar in Kgf. Stroke in mm. H Push Piston area in cm² Oil infeed R DESCRIPTION Double-acting short-stroke cylinders, with threaded body, for easy installation and positioning on specific equipment. APPLICATIONS These cylinders are used to manufacture shearing, pressing and piercing tools, for thin sheets or pipes. As a rule they are driven by hydropneumatic or hydraulic power units. / T = Pull effort / S = Push...

Spring lock cylinder – hydraulic release (Series CB 09) Max working pressure: 200 bar TECHNICAL DATA Single-acting cylinders Used with oil only Threaded body Stroke in Oil volume in Piston area in mm. H cm³ cm² 2,7 3,7 DESCRIPTION Piston with partially tapped through hole. Threaded body for pre-loading a series of Belleville springs, built-into the cylinder, for a considerable locking force. To release it, inject oil under pressure into the cylinder. APPLICATIONS These cylinders are highly recommended to permanently lock guides, tailstocks, heads of machine tools. They are used also to lock...

Support bases SQUARE SUPPORT BASES RECTANGULAR SUPPORT BASES

Ring nuts - Tips RING NUTS TECNOFLUID ENGINEERING SRL • Via Dei Mille,1 • 20031 Cesano Maderno (MB) Italy Tel. +39 0362 645981 • Fax +39 0362 645999 • info@tecnofluid.info • www.tecnoflu