HYDRAULIC LOCK CYLINDERS
11Pages

Hydraulic Lock Cylinders Technical documentation HYDRAULIC LOCK CYLINDERS CB TYPE 1

Hydraulic Lock Cylinders Technical documentation The hydraulic lock cylinders of the CB series complete the wide range of special cylinders manufactured by our company for a variety of industrial sectors. The CB hydraulic lock cylinders meet the demand for small-sized pressing devices delivering considerable pushing force. Due to their small overall dimensions (their main characteristic), according to the model, these cylinders can be used to lock small, medium or large-sized pieces. They can also be used for riveting, bending, marking or assembly works. They are manufactured in two...

Hydraulic Lock Cylinders Technical documentation Cylinders with threaded body – spring return (Series CB 01) Max working pressure: 200 bar Single-acting cylinders Used with oil only 5-15-25 mm strokes TECHNICAL DATA Oil volume in Piston area in Oil infeed R cm³ cm² DESCRIPTION Small-sized pushing piston, with threaded body, for easy connection to the equipment. APPLICATIONS Owing to their reduced overall dimensions and considerable pushing force, they are highly recommended to lock small and medium-sized items. They can be provided complete with supports, ring nuts and tips. As a rule they...

Hydraulic Lock Cylinders Technical documentation Cylinders with threaded body – spring return (Series CB 02) Max working pressure: 320 bar TECHNICAL DATA Single-acting cylinders Used with oil only 15-25-50 mm strokes Oil volume in Piston area Oil infeed R cm³ in cm² DESCRIPTION Small-sized pushing piston, with threaded body, for easy connection to the equipment. APPLICATIONS Owing to their reduced overall dimensions and considerable pushing force, they are highly recommended to clamp medium and large-sized items. They are also used for riveting, bending, marking and assembly works. They can...

Hydraulic Lock Cylinders Technical documentation Cylinders with smooth through hole – smooth body – spring return (Series CB 03) Max working pressure: 320 bar TECHNICAL DATA Single-acting cylinders Used with oil only 6-12mm stroke. Oil volume in Piston area Oil infeed R cm³ in cm² DESCRIPTION Pushing or pulling lock piston, provided with a smooth through hole, to fit threaded easy-to-adjust pins or tie rods. APPLICATIONS Used for pushing or pulling. In the first case, fit properly shaped heads into the central hole. For rear clamping, use the holes on the lower base of the cylinder. It can...

Hydraulic Lock Cylinders Technical documentation Cylinders with tapped through hole – threaded body – spring return (Series CB 04) Max working pressure: 320 bar Single-acting cylinders Used with oil only 6-12mm stroke. TECHNICAL DATA MODEL Oil volume Piston area in in cm³ cm² DESCRIPTION Pushing or pulling lock piston, provided with a tapped through hole, to fit threaded easy-to-adjust tie rods. Threaded body. APPLICATIONS Used for pushing or pulling. In the first case, fit properly shaped heads into the central hole. For rear clamping, use the holes on the lower base of the cylinder. It...

Hydraulic Lock Cylinders Technical documentation Pull cylinders - threaded body – spring return (Series CB 06) Max working pressure: 320 bar TECHNICAL DATA Single-acting cylinders Used with oil only 10-25 mm stroke Strength at Stroke in Oil volume in Piston area 320 bar in mm. H cm³ in cm² Kgf. DESCRIPTION The piston of these cylinders moves inwards, and generates a pulling force. The body its threaded for easy assembly, and is provided with 4 tapped holes for flange connection. APPLICATIONS These cylinders are used for traditional numeric control or transfer machinery/equipment, and can be...

Hydraulic Lock Cylinders Technical documentation Double-acting cylinders – threaded body (Series CB 08) Max working pressure: 250 bar Double-acting cylinders Used with oil only 25-50-80-100 mm strokes TECHNICAL DATA Strength at 250 bar in Kgf. Stroke in mm. H Push Pull DESCRIPTION Double-acting short-stroke cylinders, with threaded body, for easy installation and positioning on specific equipment. APPLICATIONS These cylinders are used to manufacture shearing, pressing and piercing tools, for thin sheets or pipes. As a rule they are driven by hydropneumatic or hydraulic power units.

Hydraulic Lock Cylinders Technical documentation Spring lock cylinder – hydraulic release (Series CB 09) Max working pressure: 200 bar Single-acting cylinders Used with oil only Threaded body TECHNICAL DATA MODEL Stroke in Oil volume in Piston area in mm. H cm³ cm² 2,7 3,7 DESCRIPTION Piston with partially tapped through hole. Threaded body for pre-loading a series of Belleville springs, built-into the cylinder, for a considerable locking force. To release it, inject oil under pressure into the cylinder. APPLICATIONS These cylinders are highly recommended to permanently lock guides,...

Hydraulic Lock Cylinders Technical documentation Support bases SQUARE SUPPORT BASES RECTANGULAR SUPPORT BASES

Hydraulic Lock Cylinders Technical documentation Ring nuts - Tips RING NUTS TECNOFLUID ENGINEERING srl Via Dei Mille,2/C 20811 CESANO MADERNO (MB) ITALY TEL. 0362.645981 FAX 0362.645999 e-mail info@tecnofluid.info www.tecnofluid.info