Introduction
Tecnoclima's 2009 General Catalogue introduces the innovative direct exchange air heating technology (DRY), which uses air as the vector fluid instead of water, reducing operating costs and improving system efficiency.

Company Overview
Founded in 1973, Tecnoclima specializes in air treatment, heating, and conditioning systems. The company has a significant global presence, exporting to over 40 countries and operating through subsidiaries like EMAT in France and CLIMA ITALIA.

Direct Exchange Technology (DRY)
The DRY system offers improved energy efficiency by directly transferring heat to the room, bypassing inefficient transformation stages. This results in energy savings and reduced emissions. The technology is autonomous, providing flexibility in energy utilization.

Product Range
The catalogue details various product lines, including air treatment units, warm air heaters, hydronic units, very high efficiency products, thermo ventilation and heat recovery systems, and special equipment.

KLIMAXs Series
The KLIMAXs series features autonomous single-package air treatment units with high efficiency, capable of operating in temperatures from -20°C to +40°C. They utilize a combination of heat pump and direct exchange technologies for optimal performance.

Technical Specifications
The KLIMAXs units offer a range of models with varying dimensions, air flow rates, and heating/cooling capacities. They are designed for high efficiency and low noise operation, with international certifications ensuring safety and performance.

CF-GAS/P and CF-GAS Series
These series of autonomous single-package air treatment units are designed for efficient heating, cooling, and air treatment in various environments. They utilize advanced technologies such as mechanical compression and direct expansion of refrigerating gas, heat pumps, and high-efficiency gas heat exchangers.

Specifications
The CF-GAS/P units are available in models ranging from 100 to 700, with varying dimensions, weights, and capacities. The units operate efficiently across a wide temperature range (-20°C to +40°C) and are equipped with features like vertical flux inversion and a watertight cabinet for outdoor installation.

Heating and Cooling Systems
The units employ two heating systems: a heat pump for temperatures up to +5°C and a gas heat exchanger for temperatures down to -20°C. Cooling is achieved through direct expansion technology, which reduces installation and operating costs by eliminating intermediate fluids.

Performance and Efficiency
The CF-GAS/P units boast high seasonal performance, with heating capacities ranging from 30.5 kW to 190.6 kW and cooling capacities from 23.8 kW to 170.6 kW. The CF-GAS series offers even higher capacities, with maximum heating outputs up to 524 kW and cooling outputs up to 440 kW.

Control and Safety
All functions are managed automatically by an electronic controller, which can be interfaced with remote control systems. The units are certified for safety by international authorities and are constructed with durable materials for long-lasting performance.

Additional Features
The units can be customized with various accessories, including regulation dampers, remote controls, and kits for high static pressure. The M-CF module allows for air mixing, renovation, and output, enhancing the units' versatility in different environments.

Specifications for Condensing Air Treatment Units and Warm Air Heaters
The document outlines specifications for various models, including the UTAK, M-UTAK, and DUO-MO series. These units are designed for high energy efficiency, operating at condensation conditions with efficiencies ranging from 102% to 108%.

Procedures
The units are designed for outdoor installation under extreme climatic conditions, capable of operating at temperatures as low as -45°C with a low-temperature kit.

Norms and Standards
Product safety is certified by international authorities, and thermal performance is GASTEC certified. Cooling performance follows EUROVENT conditions.

Recommendations
The document recommends using these units for residential, commercial, and industrial environments where high static pressure is required.

Key Data from Tables
The tables provide detailed dimensions, air flow rates, static pressures, and heating capacities for different models.

Critical Information
- Maximum efficiency of up to 108%
- Suitable for extreme temperatures down to -45°C
- Direct exchange technology for cost efficiency
- Wide range of accessories available
- Certified by international authorities for safety and performance

Overview of Warm Air Heaters
The document provides detailed technical specifications and features of various models of condensing warm air heaters with modulating burners, specifically the ENERGY and WIMBLEDON series.

Thermal Performance
The heaters are GASTEC certified, ensuring high thermal performance. They operate at maximum efficiency under condensation conditions, with some models achieving up to 105% efficiency.

Aeraulic Section
The document lists nominal air flow rates and static pressures for different models, indicating their capacity to handle varying air volumes and pressures.

Heating Section
The gas heat exchangers in these heaters offer both maximum and minimum output functioning. The maximum useful heating capacity ranges from 60 kW to 970 kW across different models.

Electrical Specifications
All models require a 400V, 50Hz electrical supply, suitable for industrial and commercial applications.

Peculiarities
Key features include stainless steel combustion chambers and heat exchangers, flame modulation systems, and the ability to operate efficiently at low temperatures.

WIMBLEDON Series
This series is specifically designed for pressostatic structures, such as those covering tennis courts. It features a patented airflow pathway and high-efficiency heat exchangers.

SR Series
The SR series is a modular heating section designed for integration into existing aeraulic systems. It offers high efficiency and flexibility in installation.

Series SR-UT
High-efficiency air heating sections with a two-stage atmospheric burner, achieving approximately 91% efficiency.

Series FRESH
High-performance water chillers using R410A eco-friendly refrigerating gas.

Series BESST
Reversible high-performance heat pumps using R410A refrigerating gas.

Key Features and Benefits
All series emphasize high energy efficiency and eco-friendly refrigerants.

Overview of Heating and Air Treatment Systems
The document provides technical specifications and descriptions of various heating and air treatment systems, focusing on heat pumps combined with traditional boilers, air treatment units, and warm air heaters.

Heat Pump and Boiler Systems
These systems are designed for renovation markets and existing networks with radiators. They combine heat pumps with traditional boilers to optimize energy efficiency.

Air Treatment Units
The CF-GAS series is an autonomous single-package air treatment unit designed for roof-top installation.

Warm Air Heaters
The document describes several series of gas-fired warm air heaters, including MINIJET and PA series.

Technical Specifications
Detailed specifications are provided for each product series, including heating and cooling capacities, air flow rates, dimensions, and electrical requirements.

Overview of Space Heaters
The document provides detailed technical specifications and construction characteristics of various models of gas and oil-fired space heaters designed for both indoor and outdoor use.

Construction Characteristics
The heaters feature a cabinet made of steel sheet with detachable panels, lined with radiation-proof heat insulation.

Combustion Chamber and Heat Exchanger
The combustion chamber is made of AISI 430 stainless steel with a flame-inversion model and low thermal load.

Efficiency and Certification
The heaters have an efficiency of approximately 90% and are certified in accordance with various directives.

Technical Specifications
The document lists various models with their dimensions, chimney diameter, weight, heating capacity input and output, air flow rate, useful static pressure, electric motor power, and electrical supply requirements.

Outdoor Installation
The TC-E/K series is designed for outdoor installation, featuring a protective element for the burner and electric components.

Horizontal Space Heaters
The TCO-E series is suitable for both indoor and outdoor installation, offering direct and canalized air diffusion.

Direct Air Diffusion Heaters
The TE series is designed for direct air diffusion in medium-sized environments such as industrial sheds and warehouses.

Residential Heating
The HB series is designed for residential heating, featuring a thick steel combustion chamber, a high-efficiency heat exchanger, and low sound pressure level fans.

Overview of Air Handling Units
The document provides detailed technical specifications and features of various air handling units, fan coil units, and heat recovery units.

NTN Series
This section outlines the specifications for the NTN fan wheel models, including dimensions, weight, air flow rates, static pressure, motor power, and heating/cooling capacities.

VX Series
The VX fan coil units are available in vertical and horizontal versions, with features such as a prepainted steel cabinet, ABS air outlet grid, and high-efficiency heat exchange battery.

KUBO Series
The KUBO fan coil units are designed for floor, wall, or ceiling mounting, featuring a galvanized casing, centrifugal fan, and cleanable air filter.

RCU Series
The RCU heat recovery units are designed to recover heat from foul air, transferring it to incoming air to reduce thermal shock.

Special Equipment
Tecnoclima offers customized solutions for specific industrial needs, such as appliances for overheated air production, high static pressure, and large air volumes.

Compliance and Certification
All units are certified in accordance with the Low Tension Directive, Machine Directive, and Electromagnetic Compatibility Directive.

Overview of Air Heating and Conditioning System
The document provides a detailed analysis of an air heating and conditioning system, focusing on its specifications, operational procedures, economic evaluation, and application in an industrial setting, specifically at Ferrari's Scaglietti plant.

Specifications
The system includes warm air heaters and destratifiers, with a total air flow rate of 105.720 Nm3/h.

Operational Procedures
The system operates automatically, with the destratifier activating when the air temperature reaches a set value.

Economic Evaluation
Daily operation costs include natural gas consumption of 141 m3 costing 56.40 Euro and electrical power consumption costing 5.94 Euro, totaling 62.34 Euro.

Performance and Efficiency
The system boasts high thermal efficiency, low thermal inertia, and significant operational cost reductions.

Application at Ferrari
Ferrari implemented Tecnoclima's direct exchange technology for their air-conditioning system, opting for independent rooftop units over a traditional central system.

Technological Advantages
The direct exchange technology (DRY) uses air as the vector fluid, improving efficiency and reducing costs compared to traditional systems using water.