FLEXIBLE COUPLINGS HADEFLEX® X / TX

HADEFLEX® – FLEXIBLE COUPLINGS The flexible Hadeflex® couplings are claw couplings with a flexible element to provide a torsionally flexible connection for shafts. The flexible elements excel in their wear resistance, their oil, ozone and ageing resistance and their temperature resistance from –20 °C to +80 °C. Thanks to their flexibility, impacts, rotary vibrations and noises are effectively absorbed. The flexible elements are dimensioned such that radial, axial and angular movements between the two halves of the coupling are cancelled out. The flexible Hadeflex® couplings are of the plug-in...

FLEXIBLE COUPLINGS – HADEFLEX® rotation speed min.  max.  Torque 92° Shore A black / 98° Shore A red1) Torsion spring rigidity C dyn in Nm / rad max. TKN max  changing TKW 2)  92° Shore 92° Shore 92° Shore 92° Shore 98° Shore 98° Shore 98° Shore 98° Shore 1) Torques for shaft fit with keyway 2) Maximum alternating torque up to f = 10 Hz 3) The values mentioned are valid for n = 600 rpm and may occur only separately.   At multiple misalignments or higher speeds the values must be reduced (see page 10). 4) The information concerning weights and moments of inertia apply for max

HADEFLEX® – FLEXIBLE COUPLINGS TAPER BUSHES WITH KEYWAY ACC. TO DIN 6885/1 TOLERANCE JS9 Bore ø of available taper bushes mm *  These bore holes are with flat keyway in accordance with DIN 6885/3. TECHNICAL DATA XW1 Torque 92° Shore A nature / 98° Shore A blue1) Size 92° nominal TKN  98° nominal TKN  Nm Torsion spring rigidity C dyn in Nm / rad max. TKN max  changing TKW 2)  92° Shore 92° Shore 92° Shore 92° Shore 98° Shore 98° Shore 98° Shore 98° Shore Nm

FLEXIBLE COUPLINGS – HADEFLEX® TYPE XW 1 FOR KEYWAY MOUNTING Max.  rotation speed 1)  Drill holes H7 with keyway in accordance with DIN 6885/1; tolerance zone JS9 and set screws on the keyway 2) The information concerning weights and moments of inertia apply for max. drill holes per coupling;   coupling half materials: EN-GJL-250 (GG-25) in accordance with DIN EN 1561 or *aluminium.

HADEFLEX® – FLEXIBLE COUPLINGS Power P of the IEC motors and allocated Hadeflex® couplings X 3000 rpm P Hadeflex® kw size Size of the threephase motor Shaft ends Form E DIN 748 part 3 d × l at speed approx. 3000 rpm As proposed in the table for surface cooled three-phase motors with cage rotor acc. to DIN 42673, page1 (data for motor 56, 63, 71, 80, 315 L, 355 L, 400 L, see catalogue Siemens). This allocation is a preliminary selection for normal conditions of operation.   For conditions of operation under shock and c

FLEXIBLE COUPLINGS – HADEFLEX® TECHNICAL DATA FW-FNW Torque Perbunan   rigidity 80° Shore A1) Size Torsion spring rigidity C dyn in Nm / rad 1)  Torques for shaft fit with keyway 2)  Maximum alternating torque up to f = 10 Hz 3)  The values mentioned are va

HADEFLEX® – FLEXIBLE COUPLINGS TYPE FW FOR KEYWAY MOUNTING 1) Drill holes H7 with keyway in accordance with DIN 6885/1; tolerance zone JS9 and set screws on the keyway 2)  he information concerning weights and moments of inertia apply for max. drill holes per coupling;   T coupling half materials: EN-GJL-250 (GG-25) in accordance with

FLEXIBLE COUPLINGS – HADEFLEX® TYPE FNW FOR KEYWAY MOUNTING 1) Drill holes H7 with keyway in accordance with DIN 6885/1; tolerance zone JS9 and set screws on the keyway 2) The information concerning weights and moments of inertia apply for max. drill holes per coupling;   coupling half materials: EN-GJL-250 (GG-25) in accordance with DIN EN 1561.

HADEFLEX® – FLEXIBLE COUPLINGS ALLOWABLE MISALIGNMENTS Radial misalignment Axial misalignment Angular misalignment Reduction of the allowable values of misalignment when the   combination of misalignments occur or at other rotational speeds: ∆ Wr ∆ Wa ∆ Ww ≦  1 = applies to speeds of 600 rpm + + ∆ Kr ∆ Ka ∆ Kw ≦  0.8 601 – 1000 rpm ≦  0.65 1001 – 1500 rpm ≦  0.50 1501 – 3000 rpm   ∆ Kr / a / w  =  allowable radial, axial or angular misalignment of the shafts resp.   of the coupling halves measured radial, axial or angular  ∆ Wr / a / w  =  misalignment of the shafts resp.   of the coupling halves...

FLEXIBLE COUPLINGS – HADEFLEX® SAFETY FACTOR S Assignment of load characteristics according to type of working machine S S M M M S S M M M M DREDGERS Bucket conveyor Landing gear (caterpillar) Landing gear (rail) Manoeuvring winches Pumps Impellers Cutter heads Slewing gear GENERATORS, TRANSFORMERS Frequency transformers Generators Welding generators CHEMICAL INDUSTRY Cooling drums Mixers Agitators (liquid material) Agitators (semi-liquid material) Drying drums Centrifuges (light) Centrifuges (heavy) OIL INDUSTRY Pipeline pumps Rotary drilling equipment CONVEYORS Pit-head winches Winding engines...

Tecnamic  GmbH & Co. KG Kleinbahnstraße  21 5