PROVASET T3D
2Pages

Provaset T3D EQUIPMENT FOR LEAK TESTS BY DIFFERENTIAL METHOD HIGH PERFORMANCE FULLY INTERFACEABLE COLOUR GRAPHIC DISPLAY TOUCH SCREEN • Leak tests with full scale up to 30 bar and in vacuum • Resolution of 0.1 Pa (0.001 mbar) • 3.5” colour TFT LCD display with touchscreen • 100 test programs with sequential mode • Electronic pressure regulator • Digital I/O interface for PLCs, RS232/ RS485 serial lines and USB for PC • Test recording via Ethernet and on USB memories • Real time SPC statistics T3D is an innovative device for leak tests by pressure differential method. By measuring the pressure difference between the product being tested and a reference sample, the test times are reduced and the sensitivity is heightened. The touch interface, with a colour display and the real-time visualization of the tests, makes the programming and the use simple Easily adjustable testing parameters and immediate. Its high measurement resolution and the test accuracy, in combination with the electronic regulation of the filling pressure, allow to perform not only leak tests but also distructive burst tests, safety valves opening checks, volumetric control, obstruction tests and “in bell” tests on sealed products or by interception method. Real-time SPC analysis and production graphs The control of external automations, the interface with barcode readers and printers and the possibility to record the tests on USB memories or via Ethernet, make it a complete and suitable instrument for the most modern production applications. Graphical display of the testing cycle T3D is entirely designed and manufactured in Italy. Our products guarantee an excellent quality and the be

SPECIFICATIONS Power Supply DIFFERENTIAL PRESSURE DECAY The testing cycle is based on a comparison between the product being tested and a reference volume. In this way, the effects of the pressure settlement inside the tested product are reduced and the accuracy in detecting a leak rate is increased, achieving excellent results in a quicker interval. OPERATING PRINCIPLE Test cycle mainly consists of three phases: FILLING (time T1): the product being tested and the reference volume are both filled to the programmed rated test pressure. SETTLING (time T2): this phase is necessay for the...