DOSASET_05-23_EN
2Pages

DOSASET DISPENSER OF CYCLOHEXANONE SOLVENT FOR PVC TUBE BONDING • Up to 4 adapters for bonding tubes with different diameters Adapters for internal and external bonding Programmable bonding sequence The vibration of the tube adapters compensates for the tolerances of tube diameters S485 communication interface for data transmission in the solvent, reducing the problems a chamber where the solvent level is cyclohexanone or similar solvents, continuously controlled. used for manual bonding of plastic DOSASET employs a new patented The solvent is kept inside a sealed medical equipment, tubes and joints. method, based on a rotating and DOSASET does not use porous vibrating system: the dispensing automatically loaded trough a elements or capillary holes or fluid pneumatic micro-pump from the bottle pumps: its adapters are directly dipped circumference of a wheel turning inside DOSASET ADVANTAGES • No maintenance required to prevent clogging or obstruction Constant solvent dispensing, determined only by the shape of tube adapters Reduced evaporation of the solvent, contained inside the dispensing chamber No wrist rotation, reduced risk of carpal tunnel syndrome Automatic control of solvent level, with automatic shut-off if the level is not restored The vibration of the tube adapters compensates for the tolerances of tube diameters Up to 4 tube adapters for different diameters on the same instrument A sequence of tube adapters can be programmed for subassemblies with different tube diameters Only one selected tube adapter is available for each n

Dosaset SPECIFICATIONS Power Supply DST 401: 12 Vdc, 1 A, jack diameter 2.1 mm DST 501: 24 Vdc, 1.5 A, binder connector 4 keys: [R] Reset, [S] Sequence, Back, Forward Green LED: power on, Red LEDs: level alarm / wheel alarm Yellow LEDs: sequence / photocell / wheel position Wheel Dispensing Up to 4 adapters for bonding tubes with different diameters Standard Adapters Adapters for OUTER diameters bonding: 4.1 – 5.5 – 6.8 – 9.54 – 12.0 mm; Depth: 4.0 – 6.0 – 8.0 – 10.0 mm. Adapters for INNER diameters bonding: 3.0 mm (OD max 10.0 mm); Depth: from 2.0 to 8.0 mm Adapters for simultaneous ID/OD...