INVERTER ROCKER ARM SPOT WELDERS 25kVA

Product catalog summary

Overview: This document provides technical specifications for the TECNA Inverter Rocker Arm Spot Welders, models 6010 and 6011, with a power capacity of 25 kVA. These machines are designed for pneumatic operation and are suitable for various welding applications.

Specifications:

Adjustable Arm Depth: Both models feature adjustable arm depths to accommodate different welding requirements.
Nominal Power: The nominal power at 50% duty cycle is 25 kVA for both models.
Maximum Welding Power: The maximum welding power is 156 kVA.
No Load Secondary Voltage: The secondary voltage at no load is 13 V.
Maximum Short Circuit Current: The maximum short circuit current is 12 kA.
Supply Voltage and Frequency: The machines operate at 400 V and 50 Hz, with other voltages and frequencies available upon request.
Delayed Fuses: Both models require 35 A delayed fuses for 400 V operation.
Mains Cable Section: A cable section of 10 mm² is recommended for a length of 30 meters at 400 V.
Insulation Class: The insulation class is F.

Mechanical Specifications:

Throat Depth: Model 6010 has a minimum throat depth of 230 mm and a maximum of 550 mm, while model 6011 ranges from 380 mm to 700 mm.
Electrode Force: The maximum electrode force is 240 daN for model 6010 and 150 daN for model 6011.
Electrode Stroke: The electrode stroke ranges from 8 to 44 mm for model 6010 and 10 to 60 mm for model 6011.
Water Cooling: Both models require water cooling at a rate of 5 l/min with a minimum/maximum water pressure of 2.5/4 bar.
Net Weight: The net weight is 187 kg for model 6010 and 190 kg for model 6011.
Arm and Electrode Dimensions: The arm diameter is 40 mm, electrode-holder diameter is 22 mm, and electrode-cone diameter is 12.7 mm for both models.

Additional Information: TECNA reserves the right to modify product specifications without prior notice. For further details, contact TECNA S.p.A. at their provided contact information.

Catalog excerpts

INVERTER ROCKER ARM SPOT WELDERS 25kVA-1

PUNTATRICI A COLONNA BRACCIO OSCILLANTE INVERTER 25 kVA INVERTER ROCKER ARM SPOT WELDERS 25 kVA PUNKTSCHWEISSMASCHINEN INVERTER 25 kVA

Open the catalog to page 1

INVERTER ROCKER ARM SPOT WELDERS 25kVA-2

Puntatrice a braccio oscillante Profondità bracci regolabile Adjustable arms depth Armlänge einstellbar Maxi mum welding power Tensione secondaria a vuoto No load secondary voltage Corrente max di corto circuito Maximum short circuit current Profondità minima Forza massima agli elettrodi Corsa agli elettrodi Profondità massima Forza massima agli elettrodi Corsa agli elettrodi Peso netto Alimentazione Fusibili ritardati (400V) Sezione cavi di linea (L=30m) (400V) Isolamento classe Pressione min/max acqua Träge Sicherungen (400V) Querschnitt Netzkabel (L=30 m) Mains cables section (L=30 m) (400V)...

Open the catalog to page 2

INVERTER ROCKER ARM SPOT WELDERS 25kVA

INVERTER ROCKER ARM SPOT WELDERS 25kVA

Catalog excerpts

All Tecna S.p.a catalogs and technical brochures