Tecmor Catalogue
16Pages

CATALOG Benders, Cutters, Combined, Stirrup and Spiral Machines for Rebar Industry

COMPANY HISTORY TECMOR was founded in 1960 by the three Mora brothers in Gavardo, a town in North-East Italy. At first the company was operating in a small shed of 100 sqm., with the aim of doing precision engineering work for the companies of the area. After developing projects for thirdparties, Tecmor designed and manufactured the first prototype of bending machine, it was 1968. In 1970, the evolution of that first prototype was officially unveiled at SAIE fair in Bologna: the PFT 35/28. The interest was immediate both in Italy and abroad: the first order was form Belgium and began the...

INDEX PROFESSIONAL FACTORY LINE BENDER S TYPE PAGE 4 BENDER 4S TYPE PAGE 5 CUTTERS C TYPE PAGE 6 STIRRUP - SPIRAL PAGE 7 JOB SITE LINE - HIGH CAPACITY BENDERS N TYPE PAGE 8 CUTTERS C TYPE PAGE 9 COMBINED N TYPE PAGE 10 FITTINGS - ACCESSORIES FITTINGS UPON REQUEST PAGE 11 In 1989, the first spiral machine was manufactured, still one of the most versatile machines in its field. The same year Tecmor also redesigned the worktop of its machines, and introduced the steel saddles, that are now a trade mark of the S and 4S Series. In 2001 Tecmor entered in the new millennium with the introduction...

S TYPE BENDERS Tecmor S Type Bending Machines have been built to meet the needs of the bending professional who must produce important quantities of finished product and then transport it to the construction site. The work table is designed to be used on both sides, supplied with 2 saddles along the entire length of the worktop to allow bending from 4 different positions. For the bending machines of the S series is available the bending arm for large diameters that allows to perform wide bending, with mandrels up to 12 times the diameter of the rebar. All the Bending machines type S have...

PROFESSIONAL FACTORY LINE The Tecmor 4S Type Bending Machines are differentiated by the presence of 4 saddles on the work surface and by the bigger size. These machines are tested to work for days in any weather condition, without ever interrupting production. As for the S series, the work table has been designed to be used on both sides. The saddles that run on the entire length of the bending machine allow you to bend from four different positions. For the bending machines of the 4S series is available the bending arm for large diameters that allows to perform wide bending, with mandrels...

6 PROFESSIONAL FACTORY LINE Famous all over the world for their unique solidity, Tecmor C Type Shears are a guarantee for the professional who has to cut large quantities of iron on a daily basis. The gears are in tempered and wear-resistant steel with automatic lubrication. All the moving parts are in tempered steel. In addition, the blades are made of special tempered steel and allow precise cutting of rebars of any size. These shears can work for whole days without problems. All Tecmor C Type Shears have a three-year warranty. Recommended accessories • Remote electrical foot pedal....

7 PROFESSIONAL FACTORY LINE STIRRUP ST 24 SP 30 Born from the Tecmor experience, the ST24 stirrup machine was designed to quickly create large quantities of stirrups with extreme precision. Equipped with a speed variator and an adjustable tool to produce any type of stirrups, this machine makes production very fast. This machine can be equipped to perform precision bends with smooth or corrugated small diameter steel bars (from 5 to 10 mm.) Designed to perform circles and spirals, Tecmor's Spiral Machines have immediately imposed themselves one of the most appreciated models of our product...

8 JOB SITE LINE - HIGH CAPACITY N TYPE BENDERS The N Type Bending Machines are built for prolonged and intensive use on the building site, where they can stay for months, working all day, exposed to any type of climate. Tecmor wanted to create a construction machine that would guarantee resistance to stress and climatic conditions, which could work for years on various construction sites without diminishing performance over time. The N Type Bending Machines are inspired by the S for strength, but have a larger bending disk, rotating in both directions, clockwise and counter clockwise, to...

9 JOB SITE LINE - HIGH CAPACITY C TYPE CUTTERS These cutters have been designed with the same characteristics of the professional C Series, but have been adapted to cut smaller diameters of rebar. They are made with a single block cast, with hardened steel in every part. The smaller size make them easier to move around the construction site. Recommended accessories • Remote electrical foot pedal. • Adjustable bars support ( C 30 - C 36 ) STANDARD EQUIPMENT Allen Wrenches

10 JOB SITE LINE - HIGH CAPACITY N TYPE COMBINED The Combined machines N Type for job site are ideal for those who want a multi-purpose solution, to optimize their investment. On these machines, with athe quality to the benders N type, is applied a cutter enabled to cut bars of a diameters up to 28 mm. With this machine, you can apply both stirrup and spiral accessories, so you could benefit from 4 applications with one machine. These benders also meet the EU standards which require a specific ratio between bar diameter and mandrels size. Recommended accessories • Equipment Stirrup • Speed...

EQUIPMENT AVAILABLE UPON REQUEST FOR BENDING MACHINES 9x9 ANGLE CONTROL PANEL The panel 9x9 angle control, with its user-friendly and intuitive programming, allows the operator to make up t 9 bends without moving the pegs inserted in the disc. Its utilisation lowers production times, especially when the operator needs to make multiple bends repeatedly. This equipment must be ordered together with the machine it cannot be installed afterwards. 10/50 ANGLE CONTROL PANEL This panel has a user friendly and intuitive programming, and allows the operators to set the bending angles, in both...

EQUIPMENT AVAILABLE UPON REQUEST FOR BENDING MACHINES STIRRUP EQUIPMENT The stirrup equipment allows to make stirrups with a standard bending machine. It is enough to install it to the work plate of the bending machine to turn it into a stirrup machine. It is suggested to combine the stirrup equipment with the rod and the standstills which are indispensable to establish the desired bending lengths and to replicate them in order to have stirrups that are always the same, quick and easy. This equipment can be purchased after the machine, and can be installed or removed at any time. SPIRAL...