SEIM CATALOGUE ENGLISH 2020
12Pages

Benders, Cutters, Combined, Stirrup and Spiral ^1 Machines for job site Rebar Management

SEIM Seim is a brand that has been successfully introduced by Tecmor on the Italian market in 1987, to satisfy the request of strong and easy to use machines for job site. SEIM benders and shears has been sold in thousand of pieces all over the world and have always amazed customers for the combination of top notch quality and affordable prices. All the Seim machines are 100% made in Italy. P TYPE BENDERS PAGE 3 P-S TYPE BENDERS PAGE 4 T TYPE CUTTERS PAGE 5 T-AP TYPE CUTTERS PAGE 6 COMBINED - STIRRUP PAGE 7 FITTINGS UPON REQUEST PAGE 9

P TYPE BENDERS Designed for the use on construction site, P Type Bending Machines represent the perfect combination of performance and price. The Seim P type bending machines have been constantly redesigned and modernized to guarantee the customer a machine for construction site at an affordable price without compromising on quality, and they are the result of Tecmor's 50 years of experience. The motor is designed to work at low voltage, the disc can rotate in both directions and the body has been designed to ensure solidity. The P type construction benders are simple to use machines,...

4 JOB SITE SEIM LINE Structurally identical to the classic Seim type P bending machines, but with the addition of two adjustable steel saddles along the sides of the machine, as in the Tecmor S and 4-S. the presence of the saddles makes it possible to bend from 4 different positions as well as allowing the use of the bending arm for large radii, available on request. Recommended accessories • Stirrup Equipment • Panel 9x9 • Spiral Equipment S18 • Bending Arm STANDARD EQUIPMENT n.4 WHEELS PINS Square with Pin

JOB SITE SEIM LINE The epitome of shears for construction site the Type T Seim are lightweight but at the same time super solid. The reduced weight makes them easy to move thanks to the 2 standard wheels. The Seim T type construction shears have always surprised construction companies that buy them for the combination of lightness and strength, and the quality of the blades. The blades are in fact in tempered steel, usable on all four sides and always guarantee a precise cut of the rebar. These shears are the perfect tool for construction companies who want to keep costs down without having...

JOB SITE SEIM LINE T-AP TYPE CUTTERS In a continuous search to meet the needs of a constantly evolving market, Tecmor decided to design a new type of construction shears. The TAP shears are the result of over two years of research and testing, aimed at creating a high performance yet highly lightweight shear at a competitive price. Thanks to a redesign from scratch, Tecmor has succeeded in completely renewing its way of thinking and building shears, creating an economic and simple machine, but of a quality level that only Tecmor can guarantee. Seim T-AP shears are also equipped with 4...

PGT 32/25 One of the best-selling SEIM machines, the PGT 32/25, available in both single and three-phase versions, represents the sublimation of the concept of value for money according to which the Seim brand was created. It combines the functions of cutting and bending, and thanks to special dedicated accessories, available upon request, it can also be transformed into a spiral machine and stirrup machine, thus becoming a 4-in-1 machine. Thanks to its 275 kg. of weight it is easily transportable on site and is certainly the ideal ally for any construction company. Built following the same...

SE IM SPIRAL The SE 22 Seim was born from Tecmor’s desire to give the market a rebar spiral machine within everybody's reach. This machine is the evolution of the concept behind the historic Tecmor SP 30, maintaining solidity and reliability, but focusing primarily essentiality, Tecmor has succeeded in creating a spiral machine suitable for all markets and all customers. The SE 22, can work rebars up to a maximum diameter of 22mm. and can create spirals and circles of unlimited maximum radius. STANDARD EQUIPMENT Allen Wrench Belt Wrench

EQUIPMENT AVAILABLE UPON REQUEST FOR BENDING MACHINES 9x9 ANGLE CONTROL PANEL The panel 9x9 angle control, with its user-friendly and intuitive programming, allows also the operator to make up to 9 bends without moving the pegs inserted in the disc. Its utilisation lowers production times, especially when the operator needs to make multiple bends repetedly. This equipment must be ordered togheter with the machine it cannot be installed afterwards. BENDING ARM The bending arm allows to position the contrast pin at a greater distance from the central mandrel, in comparison to the normal...

EQUIPMENT AVAILABLE UPON REQUEST FOR BENDING MACHINES BAR STOCK Composed of modular structures of 2 meters each, the bar storage system allows the operator quick access to the bars to be worked that can be quickly moved on the central rollers thanks to the special slides that allow a practical and safe handling of the rod up to the worktop. This equipment can be purchased after the machine, and can be installed or removed at any time. SHEARS STAND The stand makes it possible to raise the shears to the rolling bench level, in order to create a work line with maximum efficiency. An ideal line...

Benders, Cutters, Combined, Stirrupand Spiral Machines for job site Rebar Management The machines are built in compliance with the provisions of the Community Machinery Directive 2006/42/CE - 2014/30/UE - 2014/35/UE Regulations UNI EN ISO 12100 - CEI EN 60204/1-70/1-44/5-D.L.G.S.81/08 All the machines are equipped with the protection shown in the picture 1 at page 7. Each image and information contained in this document is purely descriptive. It is the user's responsibility to ensure that the product is used in accordance with the provisions in force, in order to prevent damage to property...