RS2CAN and CAN2RS data converters

Product catalog summary

Overview
The document describes the RS2CAN and CAN2RS data converters used in complex machinery telematics systems, including vehicles, stationary equipment, power generators, and industrial machinery. These converters integrate Modbus data from RS-485/232 interfaces and CAN j1939/S6 Telematics interface into a unified telematics network.

Specifications

Supply Voltage: 10 to 45 V
Current Consumption: 50 mA at 24 V / 100 mA at 12 V
Operating Temperature: -40 to +85 °C

Features

Configurable baud rate for CAN and RS-485/232 interfaces.
Selectable input and output data, allowing CAN messages to be mapped to Modbus registers.
Automatic scanning and parsing of CAN j1939/71.
Operates in active (sending requests) and sniffer modes within the CAN interface.

Interfaces

MasterCAN RS2CAN: Input via RS-485 and RS-232 using Modbus RTU protocol; Output via CAN j1939 + S6 protocol.
MasterCAN CAN2RS: Input via CAN j1939 + S6 protocol; Output via RS-485 using Modbus RTU protocol.

Applications
The converters are suitable for integrating various components such as fuel sensors, ECU, terminals, CAN displays, controllers, sensors, and lamps into a telematics network. They support communication via GSM 2G/3G and Wi-Fi.

Contact Information
For further inquiries, contact via phone at +375 17 240 39 73, Viber/WhatsApp/Telegram at +375 44 792 67 58, or email at [email protected]. More information is available at www.jv-technoton.com.

Catalog excerpts

RS2CAN and CAN2RS data converters GSM 2G/3G Wi-Fi Controller, sensors lamps Fuel sensors Sensors, lamps Data converter RS2CAN Input interface / protocol RS-485/232 Modbus Output interface / protocol CAN (SAE j1939/71) Input interface / protocol CAN (SAE j1939/71) Output interface / protocol RS-485 Modbus MasterCAN RS2CAN and CAN2RS converters are consolidating Modbus data from RS-485/232 interfaces and CAN j1939/S6 Telematics interface into a single telematics network. Converts 100 parameters from/to Modbus. Data converters are used in complex machinery telematics systems – for vehicles, stationary equipment, power generators, industrial machinery Features ь User can select input and output data (CAN messages to Modbus registers). ь Conﬁguration of CAN and RS-485/232 interfaces' baud rate. MasterCAN RS2CAN, control mode in RS-485/232 MasterCAN CAN2RS, control mode in RS-485 and in sniﬀer modes within CAN interface. Supply voltage Ambient temperature ь Automatic CAN j1939/71 scanning and parsing. ь MasterCAN CAN2RS can be operated in active (sending requests) Master Slave Input – RS-485 and RS-232, protocol Modbus RTU Output – CAN 2.0, protocol j1939 + S6 MasterCAN CAN2RS interfaces Input – CAN 2.0, protocol j1939 + S6 Output – RS-485, protocol Modbus RTU ADVANCED VEHICLE TELEMATICS eng/rs2c

Open the catalog to page 1

RS2CAN and CAN2RS data converters

RS2CAN and CAN2RS data converters

Catalog excerpts

All TECHNOTON catalogs and technical brochures