NozzleCrocodile contactless injector pulse reader Safe reading of gasoline and gas consumption data Tracking device NozzleCrocodile is used in a vehicle monitoring system to read signals from injector control wires of gasoline or gas engine. Pulses of fuel consumption ь Safe connection to injector control wires without damaging wire insulation. Reading injector control pulses and converting them into normalized pulses that number is proportional to the volume of consumed fuel . ь Saving warranty for a vehicle. ь The only way of fuel consumption monitoring for small commercial vehicles that do not have fuel consumption data in CAN bus. Injector Injector control pulses Contactless reader NozzleCrocodile LED indication of operating modes: red – power indicator, green – data indicator Wires comply with automotive standards resistant to breaks and temperature fluctuations Reliable fastening of injector wires Wires are placed in grooves and firmly pressed to reading surface by elastic pad Power-supplied by vehicle directly from 12/24V electrical network of vehicle, without additional adapters Easy installation - no special tools needed Њ Open NozzleCrocodile case. Ќ Put wires of injector along the marks on reading surface. Ћ Close the case until click and connect NozzleCrocodile wires to telematics unit and electrical network of vehicle. phone +420 910 122 429 WhatsApp +420 704 067 474 e-mail: [email protected] www.jv-technoton.com ADVANCED VEHICLE TELEMATICS eng/Nozzle