Marker S7 active asset tag is used for identification of hauling/attached equipment. When getting signal from Marker S7, a telematics system can record duration of equipment operation and can send notifications on coupling or uncoupling the equipment. Telematics Service Terminal EVENT Uncoupling 15.04.2020 20h 22' 35" Travel Report - Trailer 015 Active asset tag Marker S7 Contactless reader/ FMS gateway Start / Position 1. Active asset tag Marker S7 constantly transmits a signal in the "BLE-radio" mode. 2. BLE receiver S7 Radiobox CAN receives the signal from the tag if it is within the receiving radius and sends data to Terminal’s CAN j1939 port. 3. Terminal sends data to Telematics service, and also notifies users about Events by SMS and e-mail. 4. Telematics service displays Counters and Parameters, sends alerts on Events online to dispatcher. Parameters, Counters, Events in Telematic service Displayed Parameters: ь equipment coupling or uncoupling time; ь equipment coupling or uncoupling coordinates; ь average and maximum trip speed a with a trailer; ь equipment ID. ь travel time with coupled equipment. Event Alerts: ь equipment uncoupling; ь equipment coupling. Specifications Data transfer technology between a tag and a BLE receiver Number of tags that the BLE receiver identifies Radius of signal receiving the from the tag Embedded battery lifecycle Ingress Protection Rating Ambient temperature ADVANCED VEHICLE TELEMATICS eng/mar