GNOM axle load sensors

Product catalog summary

Overview: The document discusses advanced machinery telematics focusing on axle load sensors. These sensors are used for online axle load and vehicle weight measurement, locating loading/unloading sites, detecting unauthorized cargo, and preventing fines for exceeding axle load limits. They can be integrated into telematics systems or used as standalone solutions.

Specifications:

GNOM DP A and GNOM DP CAN: These models are shift sensors for vehicles with spring suspension systems, installed on the rear axle or bogie. They measure suspension shifts when vehicle load changes. GNOM DP A has an inaccuracy of ±2.5% with an analog output signal of 1.0 to 7.0 V. GNOM DP CAN has an inaccuracy of ±0.8% and uses a CAN j1939 digital interface.
GNOM DDE and GNOM S7 DDE: These are pressure sensors for vehicles with pneumatic suspension systems, installed in the air line or pneumatic cushion. They measure the pressure of compressed air with an inaccuracy of ±2.5% and an output signal of 0.25 to 3.80 V.
Wireless Sensors: These sensors offer wireless data transfer over Bluetooth to GPS trackers and smartphones. They have a maximum wireless signal range of 45 meters and are powered by a built-in battery lasting up to 5 years. The shift sensor has an inaccuracy of ±1.5%, while the pressure sensor has an inaccuracy of ±1.0% and operates at an inlet pressure of 0.1 to 1.4 MPa.

Applications: The sensors are suitable for vehicles with both spring and pneumatic suspension systems, providing critical data for fleet management and compliance with load regulations.

Contact Information: For further inquiries, contact via phone at +420 910 122 429 or email at [email protected]. More information is available at www.jv-technoton.com.

Catalog excerpts

Axle load sensors ь ь ь ь ь Online axle load and vehicle weight measurement. Locating places and number of loading/unloading. Detecting “underhand” cargo. Avoiding fines for exceeding allowed axle load. Used within telematics systems and as stand-alone solution. Pressure sensor for vehicles with pneumatic suspension system. Installed in air line or pneumatic cushion. Measures pressure of compressed air in pneumatic system. Simple analog output – can be connected to any GPS-tracker with voltage input. 0...0.8 MPa Inlet pressure Inaccuracy Output signal Shift sensor for vehicles with spring suspension system. Installed on rear axle or rear bogie of truck and/or semi-trailer. Measures suspension’s shift when vehicle load changes. Data transfer to GPS-tracker. Model Inaccuracy Analog output signal Digital interface Pressure sensor for vehicles with pneumatic suspension system. Installed in air line or pneumatic cushion. Measures pressure of compressed air in pneumatic system. Wireless data transfer over Bluetooth to GPS-tracker and smartphone. 0.1...1.4 MPa Inlet pressure Inaccuracy Power-supplied form built-in battery Maximum wireless signal range Shift sensor for vehicles with spring suspension system. Installed on rear axle or rear bogie of truck and/or semi-trailer. Measures suspension’s shift when vehicle load changes. Wireless data transfer over Bluetooth to GPS-tracker and smartphone. Power-supplied form built-in battery Maximum wireless signal range phone: +420 910 122 429 e-mail: [email protected] www.jv-tech

Open the catalog to page 1

GNOM axle load sensors

GNOM axle load sensors

Catalog excerpts

All TECHNOTON catalogs and technical brochures