DFM Industrial flow meter
DFM Industrial flow meter
- Flow Rate: Models range from 30.72 – 7.2 m³/h to 32.5 – 25 m³/h.
- Maximum Pressure: 16 bar.
- Interface: CAN (J1939)/S6, pulse output, autonomous operation.
- Kinematic Viscosity: 20.55 – 300 mm²/s (cSt).
- Ambient Temperature: Operates from -20 to +60 °C.
- Operating Principle: Utilizes oval gears rotation.
- Connection: Flange or thread to pipeline.
- Battery Life: Up to 36 months.
- Network operation via S6 Technology with a single cable bus for configuration, power supply, and signal transfer.
- Parameters and Counters: Includes instant and total liquid consumption, engine operation time, and differential liquid consumption.
- Temperature Monitoring: Measures temperature in the measuring chamber and applies a temperature correction coefficient.
- Power Monitoring: External power supply voltage and battery charge percentage.
- Event Detection: Detects air tampering, magnetic field interference, supply voltage levels, and ignition status.
- Self-Diagnostics: Includes operability checks of the flow meter.
- Embedded Flow Computer: Utilizes IoT Burger Technology for advanced vehicle telematics.
Catalog excerpts
DFM Industrial flow meter DFM Industrial measures flow rate of liquid in pipeline, also operation time and modes of pump. For liquids of various viscosity – water, gasoline, diesel, diesel oil, fuel oil. Industrial systems Storage of petroleum products Diesel-generator stations Fuel tanker trucks Embedded flow computer on IoT Burger Technology Interface CAN(J1939)/S6 Instant liquid consumption Total liquid consumption counter Liquid consumption in “Idle”, “Optimal”, “Overload”, “Tampering”, “Interference” mode counter Engine operation time in “Idle”, “Optimal”, “Overload”, “Tampering”, “Interference” mode counter Clearable liquid consumption and engine operation time counters Differential liquid consumption Temperature in the measuring chamber Temperature correction coefficient value External power supply voltage Battery charge in percentage of the maximum Internal meter memory l l Detected events: air tampering, magnetic field interference, high/low level of supply voltage, ignition switched on/off Self-diagnostics of flow meter’s operability Network operation via S6 Technology Single cable bus for configuration, power supply and signal transfer. 16 bar - CAN(J1939)/S6 interface - pulse output - autonomous (without interface) Interface Kinematic viscosity of liquid Ambient operation temperature Operating principle oval gears rotation Connection to pipeline Tracker Min – max flow rate Maximum pressure Telematic server flange, thread Battery lifetime
Open the catalog to page 1All TECHNOTON catalogs and technical brochures
UNUM_IIoT Platform catalog6 Pages
S7 Telematics Technology1 Page
GNOM axle load sensors1 Page
DFM Fuel flow meter1 Page
DUT-E fuel level sensor1 Page
S7 NMEA Data converter1 Page
- Connector
- Display module
- Data connector
- Volume flow monitor
- TECHNOTON liquid flow meter
- LCD display panel
- Management software solution
- Analysis software solution
- Real-time software
- Calibration system
- Cloud-based software
- Waterproof flow meter
- Gas flow monitor
- TECHNOTON level sensor
- Stainless steel flow monitor
- TECHNOTON liquid level sensor
- Pressure probe
- Monitoring software solution