video corpo

STARTER KITS FOR TECHNOSOFT INTELLIGENT SERVO DRIVES
2Pages

{{requestButtons}}

Catalog excerpts

STARTER KITS FOR TECHNOSOFT INTELLIGENT SERVO DRIVES - 1

Your Next Intelligent Move Technology is moving fast and the time-to-market window narrows. To capitalise on the power of embedded intelligence in Technosoft Drives and on the extreme flexibility of the Technosoft Motion Language (TMLTM), we introduce the Starter Kits for our fully Digital Motion Controller family. Beginning with iPOS4808 SK and continuing with iPOS360x SK, IDM680 SK, IDM640 SK, IBL240 SK, IBL3605 SK, IBL2403 SK, ISD860 SK, ISM4803 SK, PIM3605 SK, ISCM4805 SK etc. the Starter Kits are ready-to-run packages containing the drive, an I/O extension board plus motor, the EasyMotion Studio PC software and a full set of well-documented application notes. The Starter Kits get you fast to the point where the real motion begins: • You can immediately start evaluating the solution of your motion problem by selecting the appropriate application note and by using the I/O board to simulate the drive environment • You will use the I/O board buttons, pots and LEDs to emulate your PLC or host commands and see the Technosoft drive response • The included motor shows you how your actual motor will behave on the application when properly tuned • The EasyMotion Studio graphical interfaces (watch, trace and control panel windows) will give you the certitude that your motion solution with the Technosoft intelligent drives was found Plug-and-play Motion Control with Technosoft Starter Kits FEATURES • Plug-and-play complete H/W and S/W packages including the Technosoft drive and EasyMotion Studio • Instant emulation of PLC or host command lines (Enable, Limit Switches, I/O or Analogue Reference, ...) through push-buttons and potentiometers • Visual control of drive’s output lines via LEDs • Graphical programming and motion evaluation with EasyMotion Studio PC software • Access to an ever-growing base of application notes • Brushless or step motor pre-tuned in the drive, for immediate motion evaluation • Wire form loop test points for oscilloscope or external signals connection to the I/O board Technosoft Intelligent Servo Drive Starter Kits Technosoft offers fully digital servo drives with embedded intelligence, based on the Technosoft MotionChipTM technology. These drives control brushless or step motors, in torque, speed or position loop, using high-level motion commands and offering PLC-specific functionality. They bring flexibility (on-the-fly configuration modification), high-performance (fully digital control implementation), advanced motion control (powerful reference generator module), embedded intelligence (high-level motion language programmable) and advanced programming and analysis tools (EasyMotion Studio platform). No more time wasted with set-up cables, wrong pin-out connections for motor sensors or PLC lines. The Starter Kit hardware and software are complete, just... • Hookup a standard DB9 serial cable to the PC and poweron • Launch the EasyMotion Studio PC software, select the template corresponding to the desired application note and play the motor • Click on the I/O board buttons to trigger or emulate motion events That’s all, your application development process ends here when using the Starter Kits from Technosoft. • iPOS4808 SK-BL, iPOS360x SK-BL, IDM640 SK-BL, IBL2403 SK-BL, IBL2401 SK-BL, IBL3605 SK-BL, ISD860 SK-BL, ISM4803 SK-BL, ISCM4805 SK-BL - Starter Kits for the iPOS4808, iPOS3604, iPOS3602, IDM640, IBL2403, IBL2401, IBL3605, ISD860, ISM4803 or ISCM4805 drives respectively, for brushless or DC brush motors. The optimal tools for the on-time development of the wide range of applications that are solved by the iPOS4808, iPOS3604, iPOS3602, IDM640, IBL2403, IBL2401, IBL3605, ISD860, ISM4803 or ISCM4805 intelligent drives. • iPOS4808 SK-ST, iPOS360x SK-ST, IDM640 SK-ST, IBL2403 SK-ST, IBL2401 SK-ST, IBL3605 SK-ST, ISM4803 SK-ST, ISCM4805 SK-ST - Starter Kits for the iPOS4808, iPOS3604, iPOS3602, IDM640, IBL2403, IBL2401, IBL3605, ISM4803 or ISCM4805 drives, for step motors. The perfect instruments to master the time-to-market window of a stepper application using iPOS4808, iPOS3604, iPOS3602, IDM640, IBL2403, IBL2401, IBL3605, ISM4803 or ISCM4805 intelligent drives.

Open the catalog to page 1
STARTER KITS FOR TECHNOSOFT INTELLIGENT SERVO DRIVES - 2

Easy Set-up and Programming: Plug-and-play Motion Control with Technosoft Drives It is the EasyMotion Studio that ads ease and speed to the process of development and evaluation of a motion application on a Technosoft Starter Kit. The first step after plugging the serial cable into the Starter Kit consists in system configuration made by the selection and definition of the system structure, feedback and control mode. Most often, this will be done by restoring an archived project that comes with the selected application note. As a second step, the EasyMotion Studio graphical...

Open the catalog to page 2

All Technosoft catalogs and technical brochures

  1. iMOT233S XM

    2 Pages

  2. iMOT171B

    2 Pages

  3. iMOTIONCUBE

    2 Pages

  4. iPOS360x

    2 Pages

  5. iPOS4808 VX

    2 Pages

  6. iPOS3604 VX

    2 Pages

  7. iPOS3602 VX

    2 Pages

Archived catalogs