*mydirectindustry

TSC 9910

Product catalog summary

Overview: This document provides technical specifications for heat exchangers used in heating, cooling, and steam applications. It outlines the materials, dimensions, and standards applicable to these systems.

Specifications:

Maximum Flow Rate: 600 m3/h with water.
Frame Pressure Ratings: PN10, PN16, and optionally PN25.
Materials:
- Frame: Painted carbon steel (P355NH, ASTM A516 Gr.70), Stainless steel (AISI 304L, AISI 316L).
- Plates: Stainless steel (AISI 304, AISI 316L), Titanium, Alloy SMO 254.
- Gaskets: NBR, EPDM, FKM.
- Clamping Bolts: Galvanized steel (ASTM A193 B7), Stainless steel (ASTM A193 B8, B8M).

Dimensions:

Nominal Pressure: PN10 and PN16.
Key Measurements:
- A: 763 mm (PN10), 773 mm (PN16).
- B: 396 mm, C: 2127 mm, D: 1536 mm, H: 262.5 mm, G: DN200 (8").
- Plate Surface: 0.963 m², Channel Volume: 2.4 liters, Plate Weight: 4.5 kg, Plate Thickness: 0.5 mm (0.6 mm optional).
- Frame Weight: 1330 kg (PN10), 1720 kg (PN16).
- Clamping Bolts: 12 M30 + 4 M30 (PN10), 12 M36x3 + 4 M30 (PN16).
- E: Ranges from 715 mm to 1965 mm depending on the number of plates (max 323 plates).

Standards and Compliance:

Manufactured according to PED 2014/68/UE.
Expandable by 20% for each length, with a maximum of 389 plates.

Connection Types:

Flange predisposition DN200, with optional rubber coating.
ANSI options available.

Note: Techno System reserves the right to modify technical and constructive features without notice.

Catalog excerpts

APPLICATIONS Heating, Cooling, Steam applications MAX. FLOW RATE_600 m3/h (with water)_ FRAME PN10, PN16 (on request also PN25) TSC9910 MATERIALS FRAME Painted carbon steel P355NH (EN 10028/3a) PLATES Stainless steel AISI 304 Painted carbon steel ASTM A516 Gr.70 Stainless steel AISI 316L Stainless steel AISI 304L Titanium Stainless steel AISI 316L AlloySMO 254 CLAMPING Galvanized steel ASTM A193 B7 BOLTS Stainless steel ASTM A193 B8 Stainless steel ASTM A193 B8M Plate surface (m2) Vol. ofchannel (l) Weight of plate (Kg) Plate thickness (mm) Weight offrame (Kg) Clamping bolts The plate heat exchangers are made according to the PED 2014/68/UE Note: the above quantities can be considered an expanability of 20%for each length. The max quantity of plates forthis exchanger is 389 Also available ANSI Techno System reserves the right to modify, without notice obligation, technical and constructive features of every heat exchanger mentioned in this work. □ Flange predisposition DN200 with coating rubber Also available ANSI

Open the catalog to page 1

COMPANY WITH QUALITY SYSTEM CERTIFIED BY DNV Techno System reserves the right to modify, without notice obligation, technical and constructive features of every heat exchanger mentioned in this work.

Open the catalog to page 2

TSC 9910

TSC 9910

Catalog excerpts

All TECHNO SYSTEM catalogs and technical brochures