*mydirectindustry

TSC 7110

1 / 1 PageView full catalog

TSC 7110

Product catalog summary

Applications: The heat exchangers are suitable for heating, cooling, and steam applications.

Specifications:

Max Flow Rate: 600 m3/h with water.
Frame Pressure: PN10, PN16 (PN25 available on request).
Materials:
- Frame: Painted carbon steel P355NH (EN 10028/3a), ASTM A516 Gr.70, Stainless steel AISI 304L, AISI 316L.
- Plates: Stainless steel AISI 304, AISI 316L, Titanium, Alloy SMO 254.
- Gaskets: NBR, EPDM, FKM.
- Clamping Bolts: Galvanized steel ASTM A193 B7, Stainless steel ASTM A193 B8, B8M.

Dimensions:

Nominal Pressure: PN10, PN16.
Dimensions (mm):
- A: 763 (PN10), 773 (PN16)
- B: 396
- C: 1737
- D: 1146
- H: 262.5
- G: DN200 (8“)
Plate Surface: 0.67 m²
Volume of Channel: 1.82 liters
Weight of Plate: 3.4 kg
Plate Thickness: 0.5 mm (0.6 mm)
Weight of Frame: 1030 kg (PN10), 1300 kg (PN16)
Clamping Bolts: N°10 M30 + N°4 M30 (PN10), N°10 M36x3 + N°4 M30 (PN16)
Expandable Lengths (mm): 715 (max 93 plates), 965 (max 139 plates), 1215 (max 185 plates), 1465 (max 231 plates), 1715 (max 277 plates), 1965 (max 323 plates)

Standards: Manufactured according to PED 2014/68/UE.

Additional Information: The maximum number of plates for this exchanger is 389, with an expandability of 20% for each length.

Connection Type: Flange predisposition DN200, with options for rubber coating and ANSI availability.

Catalog excerpts

COMPANY WITH QUALITY SYSTEM CERTIFIED BY ONV APPLICATIONS Heating, Cooling, Steam applications MAX. FLOW RATE_600 m3/h (with water)_ FRAME PN10, PN16 (on request also PN25) TSC7110 MATERIALS FRAME Painted carbon steel P355NH (EN 10028/3a) PLATES Stainless steel AISI 304 Painted carbon steel ASTM A516 Gr.70 Stainless steel AISI 316L Stainless steel AISI 304L Titanium Stainless steel AISI 316L AlloySMO 254 CLAMPING Galvanized steel ASTM A193 B7 BOLTS Stainless steel ASTM A193 B8 Stainless steel ASTM A193 B8M Plate surface (m2) Vol. ofchannel (l) Weight of plate (Kg) Plate thickness (mm) Weight offrame (Kg) Clamping bolts DIMENSIONS The plate heat exchangers are made according to the PED 2014/68/UE Note: the above quantities can be considered an expanability of 20%for each length. The max quantity of plates forthis exchanger is 389 Also available ANSI Techno System reserves the right to modify, without notice obligation, technical and constructive features of every heat exchanger mentioned in this work. □ Flange predisposition DN200 with coating rubber Also available ANSI

Open the catalog to page 1

TSC 7110

TSC 7110

Catalog excerpts

All TECHNO SYSTEM catalogs and technical brochures