*mydirectindustry

TSC 4410

Product catalog summary

Overview: This document provides technical specifications and features of heat exchangers produced by Techno System. It includes details on applications, materials, dimensions, and compliance with standards.

Applications: The heat exchangers are suitable for heating, cooling, and steam applications.

Specifications:

Maximum Flow Rate: 600 m3/h with water.
Frame Pressure: Available in PN10, PN16, and optionally PN25.

Materials:

Frame: Painted carbon steel (P355NH, ASTM A516 Gr.70), Stainless steel (AISI 304L, AISI 316L).
Plates: Stainless steel (AISI 304, AISI 316L), Titanium, Alloy SMO 254.
Gaskets: NBR, EPDM, FKM.
Clamping Bolts: Galvanized steel (ASTM A193 B7), Stainless steel (ASTM A193 B8, B8M).

Dimensions:

Nominal Pressure: PN10, PN16.
Key Measurements: A: 763-773 mm, B: 396 mm, C: 1367 mm, D: 776 mm, H: 262.5 mm, G: DN200 (8").
Plate Surface: 0.4025 m².
Channel Volume: 1.274 liters.
Plate Weight: 2.4 kg.
Plate Thickness: 0.5 mm (0.6 mm optional).
Frame Weight: 730 kg (PN10), 930 kg (PN16).
Clamping Bolts: 8 M30 + 4 M30 for PN10, 8 M36x3 + 4 M30 for PN16.
Expandable Lengths: E: 710 mm (max 93 plates) to 1960 mm (max 325 plates).

Standards Compliance: The heat exchangers comply with PED 2014/68/UE.

Additional Notes: The document mentions a 20% expandability for each length, with a maximum of 389 plates for the exchanger.

Connection Type: Flange predisposition DN200, with options for rubber coating and ANSI availability.

Catalog excerpts

APPLICATIONS Heating, Cooling, Steam applications MAX. FLOW RATE_600 m3/h (with water)_ FRAME PN10, PN16 (on request also PN25) TSC4410 MATERIALS FRAME Painted carbon steel P355NH (EN 10028/3a) PLATES Stainless steel AISI 304 Painted carbon steel ASTM A516 Gr.70 Stainless steel AISI 316L Stainless steel AISI 304L Titanium Stainless steel AISI 316L AlloySMO 254 CLAMPING Galvanized steel ASTM A193 B7 BOLTS Stainless steel ASTM A193 B8 Stainless steel ASTM A193 B8M Plate surface (m2) Vol. ofchannel (l) Weight of plate (Kg) Plate thickness (mm) Weight offrame (Kg) Clamping bolts DIMENSIONS The plate heat exchangers are made according to the PED 2014/68/UE Note: the above quantities can be considered an expanability of 20%for each length. The max quantity of plates forthis exchanger is 389 Also available ANSI Techno System reserves the right to modify, without notice obligation, technical and constructive features of every heat exchanger mentioned in this work. □ Flange predisposition DN200 with coating rubber Also available ANSI

Open the catalog to page 1

TSC 4410

TSC 4410

Catalog excerpts

All TECHNO SYSTEM catalogs and technical brochures