*mydirectindustry

TSC 1420

Product catalog summary

Overview: This document outlines the technical specifications and features of heat exchangers produced by Techno System. The company reserves the right to modify these features without prior notice.

Applications: The heat exchangers are suitable for heating, cooling, and steam applications.

Specifications:

Maximum Flow Rate: 40 m3/h for DN50 and 50 m3/h for DN65 with water.
Frame Pressure: Available in PN10 and PN16, with PN25 available on request.
Materials:
- Frame: Painted carbon steel (P355NH, ASTM A516 Gr.70), Stainless steel (AISI 304L, AISI 316L).
- Plates: Stainless steel (AISI 304, AISI 316L), Titanium, Alloy SMO 254.
- Gaskets: NBR, EPDM, FKM.
- Clamping Bolts: Galvanized steel (ASTM A193 B7), Stainless steel (ASTM A193 B8, B8M).

Dimensions:

Nominal Pressure: PN10 and PN16.
Dimensions (A, B, C, D, H, G): Various measurements provided for different configurations.
Plate Surface: 0.169 m2.
Channel Volume: 0.36 liters.
Plate Weight: 0.8 kg.
Plate Thickness: 0.5 mm.
Frame Weight: 135 kg for PN10, 170 kg for PN16.
Clamping Bolts: 12 or 14 M16 for PN10, 12 or 14 M20 for PN16.
Expandable up to 209 plates.

Connection Types: Various threaded and flanged connections are available in stainless steel, polypropylene, PTFE, and carbon steel, with options for ANSI standards and additional coatings.

Catalog excerpts

APPLICATIONS MAX. FLOW RATE FRAME Heating, Cooling, Steam applications With water 40 m3/h (DN50) and 50 m3/h (DN65) PN10, PN16 (on request also PN25) FRAME Painted carbon steel P355NH (EN 10028/3a) Painted carbon steel ASTM A516 Gr.70 Stainless steel AISI 304L Stainless steel AISI 316L PLATES Stainless steel AISI 304 Stainless steel AISI 316L Titanium Alloy SMO 254 CLAMPING Galvanized steel ASTM A193 B7 BOLTS Stainless steel ASTM A193 B8 Stainless steel ASTM A193 B8M Plate surface (m2) Vol. of channel (l) Weight of plate (Kg) Plate thickness (mm) Weight of frame (Kg) Clamping bolts The plate heat exchangers are made according to the PED 2014/68/UE Note: the above quantities can be considered an expanability of 20% for each length. The max quantity of plates for this exchanger is 209 ‫ ٭‬For models with connections prepared for flanges CONNECTION TYPE  Threaded stainless steel G2”  Threaded stainless steel G21/2”  Threaded Polypropilene or PTFE G2”  Threaded Polypropilene or PTFE G21/2”  Flange DN50 (Carbon steel)  Flange DN65 (Carbon steel)  Flange DN50 (Stainless steel)  Flange DN65 (Stainless steel) Also available ANSI  Flange predisposition DN50  Flange predisposition DN65 Also available ANSI  Flange predisposition DN50 with coating rubber  Flange predisposition DN65 with coating rubber  Flange predisposition DN50 with coating stainless steel  Flange predisposition DN65 with coating stainless steel Also available ANSI Also available ANSI Techno System reserves the right to modify, without notice obligation, technical and constructive features of every h

Open the catalog to page 1

TSC 1420

TSC 1420

Catalog excerpts

All TECHNO SYSTEM catalogs and technical brochures