If you have to change inserts before the job is done, your insert has let you down. Techniks turning inserts excel in the most demanding applications to cut deeper, faster, and longer in machining steels, stainless steels, aluminum and exotics. The unparalleled strength and toughness of our inserts virtually eliminates premature insert failure saving you both time and money. Key Points: • free cutter body program • tooling package specials • high-performance & value Techniks vs other brand When tested under the same cutting conditions, Techniks inserts retained their sharpness and ran over twice as long before showing visible wear. Turning Tools Negative Tool Holder Negative Boring Bars* Positive Tool Holder Positive Boring Bars* Application Lead Angle Shank L & R Hand 2-Side Insert All Material turning & facing 93°, 95° 1" square 444 boring & facing 91°, 93°, 95° .375" to .75" 4 4 *Coolant-thru is standard for better chip evacuation TNMG VNMG WNMG CCMT TCMT Test Inserts Package Deals All-Material ISO Compatible PVD 3.5X CNMG Insert Type Milling Inserts Turning Inserts Boring Inserts fCHNIKS BUILT FOR SPEED W 58 Call 800.597.3921 or 317.803.8000 for a fast friendly quote. • Fax: 317.803.8001

Negative Turning Toolholders Product Information • Left and right hand holders • Takes CN_43_ inserts (4 corners) • 95° lead angle • 1"square shanks • For turning and facing operations. • Uses two-sided inserts Clamp Lock Part No. Description a=h b L 11 f Insert Screw Shim Clamp Pin Wrench 8669911 MCLNR-16-4D 1.00 1.00 6.00 1.25 1.25 CN_ _43_ 9344888 9333111 9344111 9344666 9322121 Product Information • Left and right hand holders • 16-3D Takes DN_33_ inserts (4 corners) • 93° lead angle • 1" square shanks • For profiling and turning operations. • Uses two-sided inserts Clamp...

Negative Turning Toolholders Product Information •• Left and right hand holders •• Takes VN__33_ inserts (4 corners) •• 93˚ lead angle •• 1" square shanks •• For profiling and turning operations. •• Uses two-sided inserts profile turning right hand shown - see table for left hand Clamp Screw Product Information •• Left and right hand holders •• Takes WN__43_ inserts (6 corners) •• 95˚ lead angle •• 1" square shanks •• For turning and facing operations •• Uses two-sided inserts turning & facing right hand shown - see table for left hand Clamp Screw Cuts ALL THESE Materials

Negative Turning Toolholders CCMT Negative Turning Toolholders CCMT Product Information • Left and right hand holders • 163D takes TN 33 inserts • 16-4D takes TN 43 inserts • 93° lead angle • 1"square shanks • For turning and facing operations. • Uses two-sided inserts CPMT CNMG CNMM CNMP DCMT DNMG DNUX EPGT EPMT KNUX RCMT SCMT SNMG TCMT TNMG TNMP TNUX TPGT TPMR VBMT VCMT VNMG WNMG WNMP CCGX DCGX DNGG TCGX TNGG mtsi—i Performance VNGG 3x the Thickness of Conventional PVD! WCMX Satisfaction guaranteed on all our CNC tooling solutions from spindle to workpiece.

Product Information • Comes in 1", 1-1/4", 1-1/2" diameter shanks • Left and right hand bars • Takes CN_43_ inserts (4 Corners) • 95° lead angle • 'P' style clamping and coolant thru forbetter chip evacuation • Used for boring and facing • Uses two-sided inserts Part No. Description d Dmin L 11 Shim Lock Pin Lever Screw Wrench Blue indicates coolant. Product Information • Comes in 1", 1-1/4", 1-1/2" diameter shanks • Left and right hand bars • A16T-PDUNR/L -3 takes DN__33_ inserts (4 corners) • A20T-PDUNR/L-4 and A24U-PDUNR/L take DN_43_ inserts (4 corners) • 93° lead angle • 'P'style clamping...

Product Information • Comes in 1"and 1-1/4" diameter shanks • Left and right hand bars • Takes VN_33_ inserts (4 corners) • 93° lead angle • 'P' style clamping and coolant thru for better chip evacuation • Used for profile boring (50° max) • Uses two-sided inserts profile boring Part No. Description d Dmin L 11 f Insert Lever Lock Screw Wrench 8188851 A16T-PVUNR-3 1.00 1.500 12 1.380 Blue indicates coolant. Product Information • Comes in 1", 1-1/4", 1-1/2" diameter shanks • Left and right hand bars • Takes WN_43_ inserts (6 corners) • 95° lead angle • 'P' style clamping and coolant...

Product Information • Comes in 1/2" and 3/4" shanks • Left and right hand holders • SCLCR/L-08-3J takes CC__32.5_ inserts (2 corners) • SCLCR/L-12-4C takes CC__43_ inserts (2 corners) • 95° lead angle • Screw clamping • Used for turning and facing operations • Uses only one side of insert Product Information • Comes in 1/2" and 3/4" shanks • Left and right hand holders • STGCR/L-08-2J takes TC__21.5_ inserts (3 Corners) • STGCR/L-12-3C Takes TC__32.5_ inserts (3 Corners) • 91° Lead Angle • Screw clamping • Used for turning & facing operations • Uses only one side of insert Screw Shim Shim Screw...

SCLCR/L 95° Coolant Thru Positive Boring Bars - Coolant Thru Product Information • Comes in 3/8", 1/2", 5/8", and 3/4" diameter shanks • Left and right hand bars • A06H-SCLCR/L-2 and A08K-SCLCR/L-2 take CC__21.5_ Inserts (2 corners) • A10M-SCLCR/L-3 and A12Q-SCLCR/L-3 take CC__32.5_ Inserts (2 corners) • 95° lead angle • Screw clamping and coolant thru for better chip evacuation • Used for boring and facing • Uses only one side of insert Part No. Description d Dmin L 11 f Insert Screw Wrench Satisfaction guaranteed on all our CNC tooling solutions from spindle to workpiece. CCMT CPMT CNMG CNMM CNMP DCMT DNMG DNUX EPGT EPMT KNUX RCMT SCMT SNMG TCMT TNMG TNMP TNUX TPGH TPGT TPMR VBMT VCMT VNMG WNMG WNMP CCGX CNGG DCGX DNGG TCGX TNGG VNGG WCMX...