Hydros – Milling Chucks – Morse Taper – Drill Chucks Hydraulic Toolholders For high-performance PLUS fast tool changes hydro's are a great choice. T.I.R. only 0.0001" at 3XD. Use reduction sleeves to run tool shanks from 1/8" up to 1" (pg. 130) Milling Chucks K S CERT New coolant option available for coolant-thru tools. Outstanding rigidity and performance (pg. 137) http://ow.ly/rKwCZ View the video. Morse Taper Holders High-Precision Drill Chucks Techniks Certified for accuracy (pg.148) Better accuracy and holding power than Jacobs Chucks (pg. 146) Built for Speed. All Techniks products are backed by our 100% satisfaction guarant

Our hydraulic holders extend tool life and improve surface finish because T.I.R. is only 0.0001". Each holder is factory balanced to 25,000 RPM at G2.5. Extended length hydraulic holders are a great choice for mold work, or any time you need smooth, accurate cutting at extended lengths. Precision Reduction Sleeves Use Hydraulic Chucks for: Use sleeves for fast tool changes Fast tool changes are performed with just a twist of a wrench (included). You can change tools in-spindle without the need for setup equipment. •• face milling and edge milling •• drilling •• reaming •• chamfering face milling...

Features • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" measured at 3X shank diameter • Taper precision ground to AT3 standard • AD/B CoolFLEX coolant standard Hydraulic Chucks provide powerful, vibration-free cutting. Hydros are a good choice when you need T.I.R. of 0.0001" and high holding power. CAT40 Hydraulic Toolholders - Inch and Metric Part No. DescriptiondlD1D2LLIL2Thread 154500 CAT40AD/B-HC 1/2S-2.52 Hydro 1/2" 1.654" - 2.520" - 1.457" M10x1.0 Extended length hydros are a great choice for mould work or wherever high accuracy and smooth cutting is required....

CAT50 High Precision Hydraulic Toolholders Features • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" measured at 3X shank diameter • Taper precision ground to AT3 standard • AD/B CoolFLEX coolant standard Hydraulic Chucks provide powerful, vibration-free cutting in all materials. Hydros are a good choice when you need T.I.R. of 0.0001" and high holding power. Tool changes are fast and easy and can be performed in-spindle. Simply turn the adjusting screw to apply hydraulic clamping on tool shank. Use reduction sleeves to run a variety of shank sizes all from 1/8" up to 5/8". CAT50 Hydraulic Toolholders...

Features • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" measured at 3X shank diameter • Taper precision ground to AT3 standard • AD/B CoolFLEX coolant standard Use cutting tools with sun H6 shank tolerance, Hydraulic Chucks provide powerful, vibration-free cutting in all materials. Hydros are a good choice when you need T.I.R. of 0.0001" and high holding power. Tool changes are fast and easy and can be performed in-spindle. Simply turn the adjusting screw to apply hydraulic clamping on tool shank. Use reduction sleeves to run a variety of shank sizes all from 1/8" up to 5/8". * Note: Wrench...

Features • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" measured at 3X shank diameter • Taper precision ground to AT3 standard • AD coolant-thru is standard Hydraulic Chucks provide powerful, vibration-free cutting in all materials. Hydros are a good choice when you need T.I.R. of 0.0001" and high holding power. Use cutting tools with a H6 shank tolerance. HSK63A Hydraulic Toolholders - Inch and Metric Part No. Description d1 D1 D2 L L1 L2 Thread 157250 HSK63A-HC 1/4-70 Hydro 1/4" 1.024" 1.969" 2.756" 0.945" 1.063" M5x0.8 HSK63A-HMC Hydraulic...

Hydraulic Chucks provide powerful, vibration-free cutting in all materials. Hydros are a good choice when you need T.I.R. of 0.0001" and high holding power. Use cutting tools with a H6 shank tolerance. Features • Balanced to 25,000 RPM at G2.5 • T.I.R. 0.0001" measured at 3Xshank diameter • Taper precision ground to AT3 standard • AD coolant-thru is standard HSK100A Hydraulic Toolholders - Inch and MetricPart No. Description d1 D1 D2 L L1 L2 Thread 159250 HSK100A-HC 1/4-75 Hydro 1/4" 1.024" 1.969" 2.953" 1.024" 1.063" M5x0.8 We stand behind all our...

Features • Made from high-grade tool steel • Precision ground accuracy • Fits tools 1/8" up to 5/8" (3-20mm) 20mm O.D. - Metric or Inch I.D. Sleeves Part No. 820030 820040 820050 820060 820080 820100 820120 820140 820160 520108 520316 520104 520516 520308 520102 520508 Description, O.D. - I.D. 20-03 reduction sleeve 20-04 reduction sleeve 20-05 reduction sleeve 20-06 reduction sleeve 20-08 reduction sleeve 20-10 reduction sleeve 20-12 reduction sleeve 20-14 reduction sleeve 20-16 reduction sleeve 20-1/8" reduction sleeve 20-3/16" reduction sleeve 20-1/4" reduction sleeve 20-5/16" reduction sleeve 20-3/8"...

Each Techniks High-Performance Milling Chuck is inspected, tested, and certified for quality, accuracy, and holding power, A full lab report is included with each holder, Features • Grips shank up to 5x tighter than ER 40 holders • Nut seats against the flange when properly tightened (prevents overtightening) • CoolESLAST coolant-thru standard on all milling chucks Standard Features for Techniks Cool BLAST Coolant-Thru Machined Bearing Cage Machined bearing cage ensures accuracy and gripping force, We stand behind all our products with our 100% Satisfaction Guarantee • www.techniksusa.com

Features • Techniks Certified for dual-contact spindles • Grips shank up to 5x tighter than ER 40 holders • Nut seats against the flange when properly tightened (prevents overtightening) 3/4" chuck shown with optional coolant cap and Black Gold coolant ring. CAT40, CAT50 Milling Chucks with DualDRIVE Torque Tested to 5x Tighter Grip Techniks Milling Chucks provide up to 5x tighter grip on the shank than other manufacturer's ER 40 holders with an uncoated nut. Toolholder Type Shank Spins At: Other ER 40 holders 100 ft/lbs Techniks 3/4" milling chucks 350 ft/lbs Techniks 1" milling chucks...