MagVISE Workholding Systems Magnetic Chucks We Provide Turn-Key Magnetic Workholding Solutions Contact us for solutions to your workholding bottlenecks. Modular Chucks Horizontal Chucks Indexing Chucks Round Chucks For vertical turning, grinding and 5-axis tables Injection Mold Clamping Magnetic Vises Surface Grinding Chucks View Magnetic Workholding videos at: http://ow.ly/tL1Yo All Techniks products are backed by our 100% satisfaction guarantee!

Customized Magnetic Workholding Solutions Engineered Turn-Key Solutions Since 2001, Techniks has designed, built and installed the best magnetic workholding solutions in the industry. We offer a wide range of standard magnetic chucks and vises. You also benefit from the expertise of our engineers, capable of creating solutions for all types of unique applications and parts. Our engineers can duplicate your application using our in-house CNC Tech Center in order to provide turn-key solutions that easily integrate to your system and maximize production. Rail production Large plate EEPM customized...

EEF'M chucks come with controller, a standard remote, and a touch-screen remote. MaaVISG ORKHOLDIN Features: • Up to 86,625 lbs holding power • Turn chuck ON/OFF in only a s few seconds - chuck will not lose magnetism if a power loss occurs • Induction block and subplates provide additional setup options for small parts or wraped stock Advantages: • Machine freely on 5-sides & top so you can cut the full part profile in only one operation • Reduce setup & change-over time by 50% or more! • Very uniform holding = No workpiece deformation Compared to traditional fixturing methods, magnetic workholding...

MagVISE For Large Workpieces Our 70MM pole chucks provide the increased holding power needed for large workpieces, thick plates, blocks and molds. Great choice for drilling, milling, and boring operations on vertical or horizontal mills. They easily integrate with pallet changing and tombstone systems. We stand behind our workholding solutions with full factory support to guarantee your satisfaction. Custom solutions built to your specifications are fully tested and are provided at no extra cost. 70mm pole chucks provide the most powerful flux lines with the deepest extension into the workpiece. Most...

MagVISE For Small or Thin Workpieces• Reduce operations designed for thin material 35mm pole chucks feature flux lines concentrated closer to the sufrace, providing more magnetic coverage of thin material. Our 35MM pole chucks are built specifically for the machining of thin workpieces. They are a great choice for drilling, milling, and boring operations on either vertical or horizontal mills. They easily integrate with pallet changing and tombstone systems. We stand behind our workholding solutions with full factory support to guarantee your satisfaction. Custom solutions built to your specifications are...

Ordering EEPM Workholding Chucks and Subplates • Select a chuck larger than your part for maximum holding power • Subplates are sized to match the chuck but are 1" thick -See table below • Control requires dedicated, 480v, single phase, 30A power Use induction blocks or subplates at all times to preserve the precison ground finish and prevent damage to the face of the magnetic chuck. EEEE BEBB EEEE E^EE □□□□ □□□□ □□□□ EEjEE □□□□ □□□□ □□□□ □B[pE ModelFigL x W x HPoles Holding Power Chuck Weight SubplateController EEPM-2540W-220 1 16.9" x 9.4" x 2.8" 18 12,375 lbs. 110 lbs. EEPM-2540ISP EEPM-C1...

MagVISE Induction Blocks & Subplates For EEPM Induction Blocks & Subplates We recommend using induction blocks or subplates at all times to preserve the precision ground finish and prevent damage to the face of the magnetic chuck. Order subplates from the table on page 242. Individual Induction Blocks Use induction blocks to raise the workpiece above the surface of the magnet and permit machining 5 sides and thru-hole drilling. Individual induction blocks provide maximum flexibility for creating custom setups for holding difficult workpieces and warped stock. Part No. EEPM-SPF EEPM-SP spring...

MagVISE EEPM-C Modular Workholding Chucks For workholding of ferrous materials only. •• Modular connectivity capable of conforming multiple chucks to your unique part and set up •• Operate as many as 16 chucks with 1 control •• 8,250 lbs. holding power (each chuck)* •• Easy to setup and adjust for large or irregular parts •• Reduced investment versus larger EEPM chucks •• Easy to move and setup from machine to machine EEPM-C chucks provide almost unlimited flexibility to hold workpieces of varying sizes. Use toe-clamps or bolts to position EEPM-C magnets anywhere on your machine bed or pallet...

MagVISE EEPM-C Ordering Information Ordering EEPM-C Modular Chucks Installation Example •• Select the number of chucks required •• Select the control required to operate the number of chucks needed •• Select the number and length of connection cables required We recommend using induction blocks at all times to preserve the surface finish of your magnetic chuck, and prevent damage to the face of the magnetic chuck. Use with EEPM-IB425 Induction Blocks see page 243 Up to 16 chucks can be operated from 1 control. Position the chucks on the machine bed. *Holding power varies with type of material...

MagVISE EEPM-V For Horizontal Machining Features: •• Reduce setup & change-over time by 50% or more! •• Choose from 2 or 4 sided chucks •• Machine freely on all 5-sides to reduce operations •• Very uniform holding = No workpiece deformation Induction Blocks see page 243. Induction Blocks & Subplates We recommend using induction blocks or subplates at all times to preserve the precision ground finish and prevent damage to the face of the magnetic chuck. For more information see page 243. *4 sizes available For workholding of ferrous materials only. See page 247 for holding power ratings. Mold...