TECHNIGRAF GmbH Auf der Struth 4 D-61279 Grävenwiesbach · Germany Tel. +49 (0) 6086 9626-0 Fax +49 (0) 6086 9626-28 [email protected] · www.technigraf.de UV DRYER WITH COOLING ZONE Universal UV dryer with additional cooling zone as a stationary unit with conveyor belt to dry and harden UV sensitive inks, adhesives, coatings and solder resist for medium and large size prints on all conventional materials like paper, cardboard, metal, plastic, glass and wood with additional cooling zone for heat sensitive materials. STANDARD VERSION • Ready to use, stable unit with air cooling • Extra cooling zone with additional ventilator • Higher lamp power • Massive, focusing aluminium half reflectors • Easy to replace facetted aluminium mirrors • Current indicator, digital speed indicator • Operating desk integrated, tubes on/off individually, counter for operating hours • Installation of waste air, power supply and proper fuses are up to the customer • CE conformity • Conveyor speed variable 5-35 m/min. • Material transport from left to right (instead of right to left) • Quartz glass panes • Inclined material deposit • Inlet control (energy-saving) • Intensive air cooling, temperature thermostat • PTFE conveyor belt with manual control, vacuum suction and ozone exhaust • Other conveyor belt speeds • Variable power adjustment from 30% to 100% and stabilization (electronic power supply) • Longer conveyor • Grids on both sides of tube housing to protect eyes against reflecting UV light • Operating instructions in English or German • Tubes ozone reduced and/or with different spectrum • Power max. 120 W/cm per tube units 140 and 150 cm : 100 W/cm units 160 cm and larger: 80 W/cm • UV spectrum 200-400 nm „60“ = width of belt / tube in cm „x“ = number of tubes ACCESSORY Colour if different from RAL 5002 and RAL 7035 Packing overland freight Packing sea freight Product sheet is effective as of July 1, 2014. We reserve the right to make technical changes.