Half-automatic resistance welding machine

Product catalog summary

Overview: The document describes a half-automatic resistance welding machine designed for welding chest and cross bars. It highlights the machine's capabilities, safety features, and operational procedures.

Specifications:

The machine features two independent welding areas, each equipped with a positioning tool.
It includes a vertical shutter for operator safety, preventing access during operation.
Components are manually loaded during the hidden time on one tool while welding occurs on the other.
The tool is automatically moved into the welding position using a numerical table, allowing for the successive positioning of three faces to be welded.
A specific pneumatic welding head is mounted on an X-Z numerical slide, with numerical rotation capabilities.
The welding head can rotate completely without limitations due to a rotating joint with integrated air and electrical circuits.
Electrodes have a floating movement capability.
The welding process utilizes a 1000 Hz medium frequency power source, with the transformer attached to the head.

Operational Features:

The machine is controlled by an industrial PLC with a man-machine interface via a control panel.
It can perform 32 spot welds on three faces within 60 seconds.

Catalog excerpts

Half-automatic resistance welding machine-1

Machine d'assemblage Soudage par résistance Soudo brasage - Ultrasons - Induction RESISTANCE WELDING ROBOT FOR CHEST / CROSS BARS - Half-automatic resistance welding machine. - Two independent welding areas with a positioning tool for each one. - Operator safety (access) through a vertical shutter. - Manual loading of the components in hidden time on a tool, during the welding phase on the second tool. - Automatic moving of the tool in welding position through a numerical table. Successively positioning of the 3 faces to be welded. - Specific pneumatic welding head, mounted on X – Z numerical slide. - Numerical rotation of the welding head. Rotating joint with air circuit, electrical power circuit and commands enabling a complete rotation of the whole system without limitation in head rotations. - Floating moving of the electrodes. - Welding process using a 1000 Hz medium frequency power source. Welding transformer attached with the head. - Monitoring of the cycle by an industrial PLC with interface man / machine by control panel. - Performing of 32 spot welds on 3 faces in 60 seconds. Z.I. de Revoisson – 23, rue des Frères Lumière – 69740 GENAS / France Tél.: +33 (0)4 78 90 01 61 – Fax : +33 (0)4 78 90 85 79 – E-mail : [email protected] – Internet : http://www.technaxindustrie.com S.A.S. au capital de 504 594 € - SIRET 351 814 983 00026 – APE 294 D – TV

Open the catalog to page 1

All TECHNAX catalogs and technical brochures

Archived catalogs

Resistance brazing station for copper connection
1 Page