Product Data Sheet TS924 Series Foot Valve Dispenser The TS924 and TS924V dispensers offer the best of both worlds: increased production combined with dispenser economy. Floor mounted, they have a built in pressure regulator, pressure gauge and a unique fast-dump, three-way air valve. Output rates and shot sizes are operator controlled. The TS924 is the ideal basic dispensing unit for most general applications of adhesives, sealants, coatings and compounds. Robust design Optional vacuum feature Full pneumatic operation Floor mounted The TS924V features a vacuum drawback to prevent very thin fluids from dripping and reduce tailing or stringing with thicker fluids. The TS924 Series is an ideal choice of dispenser for applications where electricity is prohibited. The dispenser is shipped with the following item: TYPICAL APPLICATIONS Dispense dots of solder paste on PCBA pads Dispense UV adhesive in medical device applications Dispensing beads of grease for lubrication applications The transfer of fluids from cartridge to syringe barrel

INDENTIFICATION OF FEATURES The TS924 Series dispenser is designed for use under the work bench. For this reason, a 6ft (1.8m) receiver head assembly should be used. The optional SH-300 syringe assembly stand makes the perfect accompanying bench holder. SPECIFICATIONS & PART NUMBERS Part Number: Size (Imperial): Size (Metric): Weight: Pressure Range: Vacuum Force: Syringe barrels: The foot dispenser can be connected to any size, or color, syringe barrel. The syringe barrel is connected to a receiver head assembly which is the link between the dispenser and syringe barrel. Receiver head assemblies...