Product Data Sheet TS5624DMP Disposable Material Path Diaphragm Valve The TS5624 Disposable Diaphragm Valve features a “first to market” Disposable Material Path. Difficult fluids such as CA’s and pre-mixed 2-part epoxies, can now be dispensed without the need of frequent cleaning, by simply replacing the entire wetted area in a matter of seconds, while the valve stays on the production line. The wetted parts are manufactured from black Polyethylene to prevent moisture and UV light come into contact with the dispense fluids. As a result, moisture sensitive fluids such as Cyanoacrylate and UV cured adhesives can be dispensed reliably and accurately. Disposable material path – no cleaning Compact size and weight Excellent moisture sensitive resistance No special tools required Low cost of ownership Accurate and repeatable dispensing The TS5624 dispenses low to medium viscosity fluids over a wide range of shot and bead sizes, down to a fraction of a micro liter. An internal spring return makes the valves fully adaptable for use with Techcon Systems controllers. A short opening stroke provides an extremely fast and positive shut-off. The seal-less valve design offers an excellent moisture sensitive resistance and the incorporated diaphragm creates a barrier between the wetted parts and the air cylinder. The valve comes with the following items:      Mounting bracket kit Valve air hose Luer lock fluid line Sample packet of DMP inserts Dispensing tip selection pack Dispensing pre-mixed 2-part epoxy. Dispensing Cyanoacrylate in bonding applications Applying a of UV lacquer in CD/DVD spin coating applications

TYPICAL SETUP Flow Control Adjustment Air Cylinder Piston Actuating Air Input Luer Lock SPECIFICATIONS & PART NUMBERS Part Number: Size Weight: Fluid Inlet Port: Fluid Outlet Port Aux Air Inlet Port: Activation Pressure Range: Max Fluid Pressure: Mounting Port: Viscosity Range: Wetted Parts: TS5624DMP See drawing 0.25 lb (113g) Luer lock female Luer lock male 10-32 UNF female 70 psi - 90 psi (4.8bar - 6.2bar) 60 psi (4.1bar) 10-32 UNF female 1 - 50 000cps Black Polyethylene Compound Replacement DMP Insert: DMP-5624 Syringe Bracket: 7509-9100 fits all syringe sizes. Fitting kit: VFKIT – for 1/4”...