Product Data Sheet TS5623 Series Handheld Diaphragm Valves TS5623 Series Hand Held Diaphragm Valves are designed to dispense low to medium viscosity material where a controlled timed shot is not required. The fluid housing and diaphragm are available in FDA-compliant Ultra High Molecular Weight Polyethylene (UHMWPE) for most applications. A Teflon® version for chemical compatibility and a Delrin® version for UVcurables are also available. The valves are easy to use and maintenance is simplified with user replaceable spare parts. The seal-less valve design features excellent moisture sensitive resistance and the incorporated diaphragm creates a barrier between the wetted parts and the rear cylinder. Long cycle life Compact size and weight Excellent moisture sensitive resistance Choice of body for chemical compatibility Convenient hanger The hand held valve does not require a controller for activation, as the valve is actuated by the use of a mechanical hand lever. These valves are designed for the operator to manually dispense low to medium viscosity fluids, such as Cyanoacrylates, Anaerobics and solvents. The valve is shipped with the following items: Luer lock fluid line Dispensing tip selection pack TYPICAL APPLICATIONS Dispensing Anaerobic thread locker onto screw threads Dispensing Cyanoacrylate in bonding applications Applying adhesive for speaker bonding

TYPICAL SETUP Rear Cylinder Activation Lever Diaphragm Fluid Inlet Body Luer Lock SPECIFICATIONS & PART NUMBERS TS5623 Series 3.9'' Length x 1.06'' 99.1mm x 26.9mm See below ⅛'' NPT female Luer lock male 70 psi (4.8bar) 1 - 50 000cps Part Number: Size (Imperial): Size (Metric): Weight: Fluid Inlet Port: Fluid Outlet Port Max Fluid Pressure: Viscosity Range: Wetted Parts And Weight 0.227 lb (103g) UHMWPE 0.257 lb (117g) Teflon® 0.245 lb (111g) UHMWPE, Delrin® (UHMWPE = Ultra High Molecular Weight Polyethylene) Fluid reservoirs: The valve can be fed from the TS1254 or TS1258 Pressure Tank, or from...