Product Data Sheet TS5540 Series Precision Spray Valve The TS5540 Series Spray Valve is designed for precise spray applications of low viscosity fluids. An external stroke control makes it easy for the operator to fine-tune fluid flow. Total control of the spray cycle is provided by adjustable fluid flow and precise control of pre-spray, atomizing air and post spray with the TS500R Multi-Purpose Digital Controller. Downtime is virtually eliminated with only one seal to replace during normal maintenance. No overspray Long life cycles Uniform spray pattern Round or elliptical spray pattern The TS5540 Series Spray Valves comes with FDA-Compliant 303 stainless steel construction in both air cylinder and fluid housing. A field replaceable Delrin® seat provides positive shut off and very long life cycles. The compact design allows for easy integration into automated applications. Two nozzle types are made available, cone (R) for round spray patterns and fan (F) for elliptical spray patterns. Both versions are available in 3 nozzle orifice sizes. The valve is shipped with the following items: Mounting bracket kit Valve air hoses Luer lock fluid line Fluid inlet fittings - 1/4'' compression and Luer lock type TYPICAL APPLICATIONS Spaying Conformal Coating onto PCBA’s Spraying oil for lubrication purposes Spraying ink to indicate Pass or Fail

TYPICAL SETUP Flow Control Adjustment Air Cylinder Actuating Air Input Needle & Piston U-Cup Seal Atomization Port Fluid Inlet SPECIFICATIONS & PART NUMBERS Series Number: Size: Fluid Inlet Port: Fluid Outlet Port Aux Air Inlet Port: Activation Pressure: Max Fluid Pressure: Operating Frequency: Mounting Port: Viscosity Range: TS5540 See drawing ⅛'' NPT female Spray cap 10-32 UNF female 70 psi (4.8bar) Min. 100 psi (6.9bar) 400+ cycles/min. ¼-20 UNC-2B female 1 - 5 000cps 303 SS, Teflon®, Delrin® Wetted Parts: Part Number TS5540-014R TS5540-028R TS5540-046R NOTE: Above data is with water and nozzle...