TS1254 Pressure Pot The new medium size TS1254 pressure pot is designed to accommodate low to medium viscosity fluids, including solvents, adhesives, as well as Cyanoacrylate (CA). Equip with pressure relief (safety) valve and couple with stainless steel chamber, the TS1254 provides safe and secure dispensing for all applications. Airtight lid seal ensures there are no leak points for air or material. The material feed line is located in the center of the lid to allow direct and continuous feed path from the material container to the valve inlet. The TS1254 is supplied with ¼” (6mm) Teflon tubing to provide resistant to all types of dispensing fluids. An optional 4mm tubing kit is available. The TS1254 pressure pot is compatible with all fluid dispensing valves. Typical Applications: Solvent, CA, Adhesives, Lubrication… Specifications Size: Chamber: Internal Volume: Weight: Temperature Range: Operating Pressure: Standard Tube Size: Optional Tube Size: 5”(127mm) x 12.5”(318mm) 4.75”(121mm) I.D. x 6.5”(165mm) 1.8 liters 10.4 lbs (4.7kg) 40 °F (4.4 °C ) – 120 °F (48.9 °C) 70 psi (4.8 bar) max. 1/4” OD (6mm); include with the unit 0.157” OD (4mm); need to buy tubing kit part number =TS1252-4MM Key Features: • • • • • • • • • Compatible with wide range of dispense fluids Pressure Relief (Safety) Valve to ensure safe dispensing operation Exhaust valve to depressurize after dispense operation One continuous tube for fluid dispensing from container to valve Use two tubing sizes (1/4” (6mm) and 4 mm) Easy to replace, disposable tubing after dispense operation No material contact with fluid chamber and tube fitting No cleaning required after dispense operation Durable construction For application assistance and ordering information please visit Techcon Systems website at www.techconsystems.com 12151 Monarch Street, Garden Grove, CA 92841 • +1 714 230-2398 • +1 714 230-2393 fax • www.techconsystems.com