Pressure Pot 0-100 psi operating pressure easily handles fluid with viscosity up to 50,000 cps. Disposable Polyethylene dip tube can be quickly changed. Includes 1/4" fluid line kit. Size: Chamber: Weight: Max Operating Pressure: 9.3" x 11.2" x 15.1" (236 x 285 x 383 mm) 6.1" I.D. x 11.0" (155 I.D. x 280 mm) 21 Lbs. (9.5 kg) 100 psi (6.9 bar) Pressure Pot The TS1258 Pressure Pot (high pressure @ 100 psi) is designed to accommodate all solvent and epoxy fluids, as well as CAs and UVs. It will also accommodate black fittings and tubing in 1/4", 3/8", and 4 mm, with stainless steel compression fittings for a continuous fluid path from the reservoir inside the pot to the point of use. Airtight seals ensure no leakage or air entrapment problems. Available Fluid Line Kits: Includes 2 fittings (black or clear tubing) TS1252-4MM TS1258-250 TS1258-375 4mm O.D. tube ¼" (6.35mm) O.D. tube 3/8" (9.5mm) O.D. tube TS918-46 Four-way Manifold Designed to provide equal flow for up to four fluid paths, the TS918-46 is used whenever precision fluid flow to multiple stations is required. The Manifold works with the TS1258 Pressure Pot (TS1258-375 Hose Kit required to use TS918-46 and TS1258 together). Made from Delrin® and suitable with UV materials.The manifold can be used with any Techcon Systems Valve. Size: Inlet Port: Outlet Port: Max Operating Pressure: Mounting: 2.6" x 2/2" (66 x 56mm) ¼" NPT (3/8" O.D. tube fitting is included) 1/8" NPT (4 Luer Lock fittings are included) 100 psi (6.9 bar) 1/4"-20UNC-2B (x2) Typical Valve Set Up 19