Product Information Packet Model AHP-1802
9Pages

Product Information Packet Model AHP-1802 Solid State, NEMA 12, Air Conditioner for Remote Temperature Control Part #0-0152-0-000 Thank you for your purchase. Information has been enclosed regarding the installation, specifications, and wiring of your solid-state assembly. Please read and follow all instructions carefully before installation. Only qualified technicians should install this equipment. If you have any questions regarding your equipment, please do not hesitate to call us at 773-342-4900, and we will be happy to assist you. We are open from 8:00 am-4:30 pm Central Time. Included in this packet you will find: Installation Notes for Air Conditioners Product Literature and Specifications Assembly Drawing # 1800-B-A18 Wiring Drawing # 1800-A-E79 Installation Drawing # 1800-A-F49 Warranty Information

Important Installation Notes for Air Conditioners Mounting Styles: Both ‘thru mount’ and ‘flush mount’ units can be positioned in any orientation and on any enclosure surface. It is important to consider interior air flow patterns when determining the mounting location. Also of importance is an unrestricted flow of ambient air thru the hot side heat exchanger. Ease of access and inspection must be considered for those applications in particularly severe environments which may require occasional maintenance. Ambient Vertical (Side/Front/Back) Mounting: Vertical mounting refers to the...

catalog 2011 working on.qxp 6/28/2011 1:58 PM Page 19 Air Conditioner - Air Cooled AHP-1800 PERFORMANCE CURVE PERFORMANCE CURVE MOUNTING STYLE Thru Mount ENVIRONMENTS SERVED NEMA-12 IP 52 NEMA-4,4X IP 56 RATING (TRADITIONAL) 1100 BTU/hr @ 0 °F ⌬T 1420 BTU/hr @ +20 °F ⌬T RATING (DIN 3168) 322 Watts L35 L35 210 Watts L35 L50 * * See page 10 ⌬ Equation of line: y=⌬⌻(°C) x=Capacity (Watts) Ambient Temp 20°C 40°C 60°C Enclosure Air y=.122x-37.0 y=.122x-39.7 y=.122x-42.3 Cold Sink y=.09x-37.0 y=.09x-39.7 y=.09x-42.3 Air Flow Pattern DIMENSIONS www.teca-eu.com 1-888-TECA-USA (832-2872) TECA 19

Ø0.22 [Ø5.5] AA D6037 06/05/03 AA 1800-A-F49 AHP-1800 SERIES TYPICAL FIELD MOUNTING MASTER A Attenzione - Se il cavo di alimentazione è danneggiato, esso deve essere sostituito dal produttore, dal suo agente di servizio o da un professionista al fine di evitare rischi. - UL 489 definisce il circuito di protezione filiale di non più di 4X il rating del protettore supplementare da utilizzare a monte. Vi suggeriamo una lenta reazione, 10-15 interruttore Amp. - Questo apparecchio non è destinato all'uso da parte di persone (bambini compresi) con ridotte capacità fisiche, sensoriali o mentali, o...

DECLARATION OF CONFORMITY TYPE OF EQUIPMENT Electrical Heat Pump, Air Conditioner Solid State Cooling Devices MODEL NUMBERS Model nos. AHP-1200, AHP-1201, AHP-1202 followed by FF, XE, X; may be followed by HC may be followed by W/TC followed by -3F or -6F or Remote TC. Model nos. AHP-1800, AHP-1801, AHP-1802 followed by FF, XE, X; may be followed by HC may be followed by W/TC followed by -3F or -6F or Remote TC. Model nos. FHP-750, FHP-752 may be followed by XE; may be followed by W/TC followed by TC-6F or Remote TC. Model nos. AHP-1501, FHP-1501 may be followed by XE; may be followed by HC...

LIMITED WARRANTY In the event a defect in material or workmanship is discovered in any of TECA’s products within one year after the date they are delivered to Buyer, and if: (a) TECA is notified of the defect in writing by certified mail within 14 days of the date of discovery; (b) TECA may then either, at its sole discretion, inspect the product at Buyer’s location, or require that the product be made available at Buyer’s expense at TECA’s premises for TECA’s inspection within 14 days of the date of notification; and (c ) the products are defective and the defects result from faulty...