CPV Cascades Cascades Cascade Control CASCADE PERFORMANCE CURVE LOW TEMPERATURE CASCADES One thermoelectric stacked on top of another with the goal of increasing the maximum temperature differential is a “cascade”. These assemblies are mounted to model AHP-1200CPV cold plate to create 2 and 3 stage cascades. The performance curves shown are actual tests run under very well insulated conditions and active loads. The performance will vary with the degree of insulation, with the amount of the active load and with the ambient temperature. TWO STAGE - LARGE PLATE CCP-22 TWO STAGE - SMALL PLATE CCP-21 THREE STAGE CCP-31 CASCADE CONTROL Cascade Control is a rear panel or complete system which provides internal power and front panel temperature control for your cascade. It becomes part of your AHP-1200CPV whether you add it yourself or order it as a finished product which can be used as a normal CPV or with an optional cascade. Part Number CC-1200: A back panel used to modify your existing high capacity AHP-1200CPV for cascade control. You will need to remove the existing rear panel and perform some minor wiring modifications. An external 24 VDC power supply will be required. Part Number 9-35EB-1-CAS: An AHP-1200CPV with all the options needed for cascade control. Those options include the back panel part # CC-1200 and hinged cover part # CH-1200. 78 TECA 1-888-TECA-USA (832-2872) www.teca-usa.com